From: Thierry Reding <treding@xxxxxxxxxx> The NVIDIA Tegra186 SoC contains an IP block that provides a register interface for ten timers with a 29-bit counter that can generate one- shot, periodic or watchdog interrupts. Signed-off-by: Thierry Reding <treding@xxxxxxxxxx> --- Changes in v2: - add required properties section - add additionalProperties: false - do not show status in example .../bindings/timer/nvidia,tegra186-timer.yaml | 61 +++++++++++++++++++ 1 file changed, 61 insertions(+) create mode 100644 Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml b/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml new file mode 100644 index 000000000000..d722cd267bf9 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/nvidia,tegra186-timer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra186 timers + +maintainers: + - Thierry Reding <thierry.reding@xxxxxxxxx> + - Jonathan Hunter <jonathanh@xxxxxxxxxx> + +description: | + The Tegra186 timer provides ten 29-bit timer counters and one 32-bit TSC + (timestamp counter). The timers run at either a fixed 1 MHz clock rate + derived from the oscillator clock. Each timer can be programmed to raise + one-shot, periodic, or watchdog interrupts. + +properties: + compatible: + oneOf: + - description: NVIDIA Tegra186 + items: + - const: nvidia,tegra186-timer + + - description: NVIDIA Tegra194 + items: + - const: nvidia,tegra194-timer + - const: nvidia,tegra186-timer + + reg: + maxItems: 1 + + interrupts: + maxItems: 10 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + timer@3010000 { + compatible = "nvidia,tegra186-timer"; + reg = <0x03010000 0x000e0000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; -- 2.24.1
