Re: [PATCH 1/7] dt-bindings: timer: Add bindings for NVIDIA Tegra186 timers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Mar 20, 2020 at 02:34:46PM +0100, Thierry Reding wrote:
> From: Thierry Reding <treding@xxxxxxxxxx>
> 
> The NVIDIA Tegra186 SoC contains an IP block that provides a register
> interface for ten timers with a 29-bit counter that can generate one-
> shot, periodic or watchdog interrupts.
> 
> Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
> ---
>  .../bindings/timer/nvidia,tegra186-timer.yaml | 55 +++++++++++++++++++
>  1 file changed, 55 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml
> 
> diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml b/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml
> new file mode 100644
> index 000000000000..f9b55041a5ca
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml
> @@ -0,0 +1,55 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/timer/nvidia,tegra186-timer.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NVIDIA Tegra186 timers
> +
> +maintainers:
> +  - Thierry Reding <thierry.reding@xxxxxxxxx>
> +  - Jonathan Hunter <jonathanh@xxxxxxxxxx>
> +
> +description: |
> +  The Tegra186 timer provides ten 29-bit timer counters and one 32-bit TSC
> +  (timestamp counter). The timers run at either a fixed 1 MHz clock rate
> +  derived from the oscillator clock. Each timer can be programmed to raise
> +  one-shot, periodic, or watchdog interrupts.
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - description: NVIDIA Tegra186
> +        items:
> +          - const: nvidia,tegra186-timer
> +
> +      - description: NVIDIA Tegra194
> +        items:
> +          - const: nvidia,tegra194-timer
> +          - const: nvidia,tegra186-timer
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 10

required props?

Also, add:

additionalProperties: false

> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    timer@3010000 {
> +        compatible = "nvidia,tegra186-timer";
> +        reg = <0x03010000 0x000e0000>;
> +        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +        status = "disabled";

Don't show status in examples.

> +    };
> -- 
> 2.24.1
> 



[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux