The following warning is observed on Jetson TX1 platform because the
supply regulator is not specified for the backlight.
WARNING KERN lp855x 0-002c: 0-002c supply power not found, using dummy regulator
The backlight supply is provided by the 3.3V SYS rail and so add this
as the supply for the backlight.
Signed-off-by: Jon Hunter <jonathanh@xxxxxxxxxx>
---
arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
index c70a610f8e3a..ea0e1efa6973 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
@@ -56,6 +56,7 @@
backlight: backlight@2c {
compatible = "ti,lp8557";
reg = <0x2c>;
+ power-supply = <&vdd_3v3_sys>;
dev-ctrl = /bits/ 8 <0x80>;
init-brt = /bits/ 8 <0xff>;
--
2.17.1
