On 29/01/2020 14:33, Jon Hunter wrote:
On 29/01/2020 10:49, Jon Hunter wrote:
On 28/01/2020 12:13, Mark Brown wrote:
I really don't understand why this is all taking so long, this thread
just seems to be going round in interminable circles long after it
looked like the issue was understood. I have to admit I've not read
every single message in the thread but it's difficult to see why it
doesn't seem to be making any progress.
Sorry about that. On reviewing this with the audio team at NVIDIA, I was
told we don't support S24_LE for I2S. The reason being that the crossbar
between the DMA and I2S is not able to extract the correct 24-bits from
the 32-bit sample to feed to the I2S interface. The Tegra documentation
does show support for 24-bits, but not state explicit support for S24_LE.
Now Ben says that he has this working, but I am unable to reproduce
this, so before just dropping the S24_LE support, I would like to
understand how this is working for Ben in case there is something that
we have overlooked here.
Ah, I see that part of the problem is that patches 6 and 7 are yet to be
applied and without these the audio is completely distorted because
there is a mismatch in the data size between the APBIF and I2S
controller. Applying these patches it is not distorted but now I am
observing the clocking issue Ben reported and so the tone is not quite
right.
I thought they had been applied? I probably dragged them back in when
putting in the support for the test channel on the colibri.
Ben, I was able to workaround the clocking issue by making the I2S word
clock 64 bits long and not 48.
Ok, that will work for I2S case, but maybe not TDM? I'd have to check.
diff --git a/sound/soc/tegra/tegra30_i2s.c b/sound/soc/tegra/tegra30_i2s.c
index bbf81b5aa723..3c9b4779e61b 100644
--- a/sound/soc/tegra/tegra30_i2s.c
+++ b/sound/soc/tegra/tegra30_i2s.c
@@ -143,7 +143,7 @@ static int tegra30_i2s_hw_params(struct
snd_pcm_substream *substream,
case SNDRV_PCM_FORMAT_S24_LE:
val = TEGRA30_I2S_CTRL_BIT_SIZE_24;
audio_bits = TEGRA30_AUDIOCIF_BITS_24;
- sample_size = 24;
+ sample_size = 32;
break;
case SNDRV_PCM_FORMAT_S32_LE:
val = TEGRA30_I2S_CTRL_BIT_SIZE_32;
For I2S I believe we only care about the edges of the word clock and so
we make the overall period of the word clock 64 bit clocks then we no
longer have an issue with the bit clock frequency. I assume that this
should also be fine for TDM modes as well.
Can you let me know if this works for you?
I'll be back in the office next week to test.
--
Ben Dooks http://www.codethink.co.uk/
Senior Engineer Codethink - Providing Genius
https://www.codethink.co.uk/privacy.html
