On Tue, Jan 28, 2020 at 10:23:20AM -0800, Sowjanya Komatineni wrote:
> diff --git a/drivers/staging/media/tegra/csi.h b/drivers/staging/media/tegra/csi.h
[...]
> +struct tegra_csi_soc_data {
I'd just leave out the _data suffix since it's not useful.
> + const struct tegra_csi_fops *csi_fops;
> + unsigned int cil_max_clk_hz;
> + unsigned int num_tpg_channels;
> +};
> +
> +/**
> + * struct tegra_csi_device - NVIDIA Tegra CSI device structure
> + * @dev: device struct
> + * @client: host1x_client struct
> + *
> + * @iomem: register base
> + * @csi_clk: clock for CSI
> + * @cilab_clk: clock for CIL AB
> + * @cilcd_clk: clock for CIL CD
> + * @cilef_clk: clock for CIL EF
> + * @tpg_clk: clock for internal CSI TPG logic
> + *
> + * @soc_data: pointer to SoC data structure
> + * @fops: csi operations
> + *
> + * @channels: list of CSI channels
> + */
> +struct tegra_csi_device {
> + struct device *dev;
> + struct host1x_client client;
> +
> + void __iomem *iomem;
> + struct clk *csi_clk;
> + struct clk *cilab_clk;
> + struct clk *cilcd_clk;
> + struct clk *cilef_clk;
> + struct clk *tpg_clk;
> + atomic_t clk_refcnt;
> +
> + const struct tegra_csi_soc_data *soc_data;
Same here. No need for the _data suffix, it's just an extra 5 characters
that you have to potentially repeat a lot but doesn't add anything.
> + const struct tegra_csi_fops *fops;
> +
> + struct list_head csi_chans;
> +};
> +
> +void tegra_csi_error_status(struct v4l2_subdev *subdev);
> +
> +#endif
> diff --git a/drivers/staging/media/tegra/csi2_fops.c b/drivers/staging/media/tegra/csi2_fops.c
> new file mode 100644
> index 000000000000..5f2f7bd3ae50
> --- /dev/null
> +++ b/drivers/staging/media/tegra/csi2_fops.c
> @@ -0,0 +1,335 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION. All rights reserved.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk/tegra.h>
> +#include <linux/delay.h>
> +
> +#include "vi2_registers.h"
> +#include "mc_common.h"
> +#include "csi2_fops.h"
> +#include "csi.h"
> +
> +/* CSI block registers offset */
> +#define TEGRA210_CSI_PORT_OFFSET 0x34
> +/* CSI CIL parition registers offset */
> +#define TEGRA210_CSI_CIL_OFFSET 0x0f4
> +/* CSI TPG registers offset */
> +#define TEGRA210_CSI_TPG_OFFSET 0x18c
> +
> +#define CSI_PP_OFFSET(block) ((block) * 0x800)
> +
> +static void csi_write(struct tegra_csi_channel *chan, u8 block,
> + unsigned int addr, u32 val)
> +{
> + void __iomem *csi_pp_base;
> +
> + csi_pp_base = chan->csi->iomem + CSI_PP_OFFSET(block);
> + writel(val, csi_pp_base + addr);
> +}
> +
> +/* Pixel parser registers accessors */
> +static void pp_write(struct tegra_csi_port *port, u32 addr, u32 val)
> +{
> + writel(val, port->pixel_parser + addr);
> +}
> +
> +static u32 pp_read(struct tegra_csi_port *port, u32 addr)
> +{
> + return readl(port->pixel_parser + addr);
> +}
> +
> +/* CSI CIL A/B port registers accessors */
> +static void cil_write(struct tegra_csi_port *port, u8 port_id,
> + u32 addr, u32 val)
> +{
> + if (port_id & PORT_B)
> + writel(val, port->cilb + addr);
> + else
> + writel(val, port->cila + addr);
> +}
> +
> +static u32 cil_read(struct tegra_csi_port *port, u8 port_id,
> + u32 addr)
> +{
> + if (port_id & PORT_B)
> + return readl(port->cilb + addr);
> + else
> + return readl(port->cila + addr);
> +}
> +
> +/* Test pattern generator registers accessor */
> +static void tpg_write(struct tegra_csi_port *port, unsigned int addr, u32 val)
> +{
> + writel(val, port->tpg + addr);
> +}
These register accessors all look a bit convoluted to me. For example,
the cil_write()/cil_read() take a port ID in order to select between
port->cila and port->cilb register banks. But then during ->hw_init()
you need to go and assign port->cila and port->cilb using a CIL base
and a port offset from that base.
So it sounds like this could be done much easier by doing something
like:
static u32 cil_read(struct tegra_csi_port *port, u8 port_id, u32 addr)
{
unsigned int offset = port_id * TEGRA210_CSI_PORT_OFFSET;
return readl(port->cila + TEGRA210_CSI_CIL_OFFSET + offset);
}
Obviously there'd be no need for port->cilb in that case and port->cila
could just be port->cil. Furthermore, since you have the prefixes here
it sounds like these will be different for other generations, so perhaps
they can be parameterized as part of the SoC-specific structure?
Another thing that I find confusing is that we have a structure called
tegra_csi_port, but in order to access registers within it we also need
to pass a port ID. So it sounds like whatever tegra_csi_port represents
isn't really a port.
Do you have any ideas on how to simplify this? It's not a terribly big
deal, so feel free to leave it like this for now. I can take a look at
simplifying later on if it keeps bugging me.
> +static int csi2_start_streaming(struct tegra_csi_channel *csi_chan,
> + u8 pg_mode, int enable)
> +{
> + struct tegra_csi_device *csi = csi_chan->csi;
> + unsigned int port_num = csi_chan->csi_port_num;
> + unsigned int block = port_num >> 1;
> + struct tegra_csi_port *port = csi_chan->ports;
> + unsigned int cil_max_freq = csi->soc_data->cil_max_clk_hz;
> + struct clk *cil_clk;
> + int ret;
> +
> + if (block == CSI_CIL_AB)
> + cil_clk = csi->cilab_clk;
> + else if (block == CSI_CIL_CD)
> + cil_clk = csi->cilcd_clk;
> + else
> + cil_clk = csi->cilef_clk;
> +
> + if (enable) {
> + ret = clk_set_rate(cil_clk, cil_max_freq);
> + if (ret)
> + dev_err(csi->dev,
> + "failed to set cil clk rate, err: %d\n", ret);
Perhaps dev_warn() since it's not a fatal error? Also, maybe spell out
"clock" in error messages (and perhaps s/cil/CIL/). I also personally
prefer the style of error messages to be:
"failed to ...: %d\n"
i.e. without that ", err" in there. We use that style very widely, which
has the advantage of making the log look very consistent.
> +
> + /* enable CIL clock on first open */
> + if (atomic_add_return(1, &csi->clk_refcnt) == 1) {
> + ret = clk_prepare_enable(cil_clk);
> + if (ret) {
> + dev_err(csi->dev,
> + "failed to enable cil clk, err: %d\n",
> + ret);
> + return ret;
> + }
> + }
> +
> + /*
> + * On Tegra210, TPG internal logic uses PLLD out along with
> + * the CIL clock.
> + * So, enable TPG clock during TPG mode streaming.
> + */
> + if (pg_mode) {
> + ret = clk_set_rate(csi->tpg_clk, TEGRA210_TPG_CLOCK);
> + if (ret)
> + dev_err(csi->dev,
> + "failed to set tpg clk rate\n");
> +
> + ret = clk_prepare_enable(csi->tpg_clk);
> + if (ret) {
> + dev_err(csi->dev,
> + "failed to enable tpg clk, err: %d\n",
> + ret);
> + return ret;
> + }
> + }
> +
> + csi_write(csi_chan, block, TEGRA_CSI_CLKEN_OVERRIDE, 0);
> +
> + /* clean up status */
> + pp_write(port, TEGRA_CSI_PIXEL_PARSER_STATUS, 0xFFFFFFFF);
> + cil_write(port, port_num, TEGRA_CSI_CIL_STATUS, 0xFFFFFFFF);
> + cil_write(port, port_num, TEGRA_CSI_CILX_STATUS, 0xFFFFFFFF);
> + cil_write(port, port_num, TEGRA_CSI_CIL_INTERRUPT_MASK, 0x0);
> +
> + /* CIL PHY registers setup */
> + cil_write(port, port_num, TEGRA_CSI_CIL_PAD_CONFIG0, 0x0);
> + cil_write(port, port_num, TEGRA_CSI_CIL_PHY_CONTROL, 0xA);
> +
> + /*
> + * The CSI unit provides for connection of up to six cameras in
> + * the system and is organized as three identical instances of
> + * two MIPI support blocks, each with a separate 4-lane
> + * interface that can be configured as a single camera with 4
> + * lanes or as a dual camera with 2 lanes available for each
> + * camera.
> + */
> + if (port->lanes == 4) {
> + cil_write(port, port_num, TEGRA_CSI_CIL_PAD_CONFIG0,
> + BRICK_CLOCK_A_4X);
> +
> + cil_write(port, (port_num + 1),
No need for parentheses around "port_num + 1" here and below.
> + TEGRA_CSI_CIL_PAD_CONFIG0, 0x0);
> +
> + cil_write(port, (port_num + 1),
> + TEGRA_CSI_CIL_INTERRUPT_MASK, 0x0);
> +
> + cil_write(port, (port_num + 1),
> + TEGRA_CSI_CIL_PHY_CONTROL, 0xA);
> +
> + csi_write(csi_chan, block, TEGRA_CSI_PHY_CIL_COMMAND,
> + CSI_A_PHY_CIL_ENABLE | CSI_B_PHY_CIL_ENABLE);
> + } else {
> + u32 val = ((port_num & 1) == PORT_A) ?
> + CSI_A_PHY_CIL_ENABLE | CSI_B_PHY_CIL_NOP :
> + CSI_B_PHY_CIL_ENABLE | CSI_A_PHY_CIL_NOP;
> + csi_write(csi_chan, block, TEGRA_CSI_PHY_CIL_COMMAND,
> + val);
> + }
> +
> + /* CSI pixel parser registers setup */
> + pp_write(port, TEGRA_CSI_PIXEL_STREAM_PP_COMMAND,
> + (0xF << CSI_PP_START_MARKER_FRAME_MAX_OFFSET) |
> + CSI_PP_SINGLE_SHOT_ENABLE | CSI_PP_RST);
> + pp_write(port, TEGRA_CSI_PIXEL_PARSER_INTERRUPT_MASK, 0x0);
> + pp_write(port, TEGRA_CSI_PIXEL_STREAM_CONTROL0,
> + CSI_PP_PACKET_HEADER_SENT |
> + CSI_PP_DATA_IDENTIFIER_ENABLE |
> + CSI_PP_WORD_COUNT_SELECT_HEADER |
> + CSI_PP_CRC_CHECK_ENABLE | CSI_PP_WC_CHECK |
> + CSI_PP_OUTPUT_FORMAT_STORE |
> + CSI_PP_HEADER_EC_DISABLE | CSI_PPA_PAD_FRAME_NOPAD |
> + (port_num & 1));
> + pp_write(port, TEGRA_CSI_PIXEL_STREAM_CONTROL1,
> + (0x1 << CSI_PP_TOP_FIELD_FRAME_OFFSET) |
> + (0x1 << CSI_PP_TOP_FIELD_FRAME_MASK_OFFSET));
> + pp_write(port, TEGRA_CSI_PIXEL_STREAM_GAP,
> + 0x14 << PP_FRAME_MIN_GAP_OFFSET);
> + pp_write(port, TEGRA_CSI_PIXEL_STREAM_EXPECTED_FRAME, 0x0);
> + pp_write(port, TEGRA_CSI_INPUT_STREAM_CONTROL,
> + (0x3f << CSI_SKIP_PACKET_THRESHOLD_OFFSET) |
> + (port->lanes - 1));
> +
> + /* TPG setup */
> + if (pg_mode) {
> + tpg_write(port, TEGRA_CSI_PATTERN_GENERATOR_CTRL,
> + ((pg_mode - 1) << PG_MODE_OFFSET) |
> + PG_ENABLE);
> + tpg_write(port, TEGRA_CSI_PG_PHASE, 0x0);
> + tpg_write(port, TEGRA_CSI_PG_RED_FREQ,
> + (0x10 << PG_RED_VERT_INIT_FREQ_OFFSET) |
> + (0x10 << PG_RED_HOR_INIT_FREQ_OFFSET));
> + tpg_write(port, TEGRA_CSI_PG_RED_FREQ_RATE, 0x0);
> + tpg_write(port, TEGRA_CSI_PG_GREEN_FREQ,
> + (0x10 << PG_GREEN_VERT_INIT_FREQ_OFFSET) |
> + (0x10 << PG_GREEN_HOR_INIT_FREQ_OFFSET));
> + tpg_write(port, TEGRA_CSI_PG_GREEN_FREQ_RATE, 0x0);
> + tpg_write(port, TEGRA_CSI_PG_BLUE_FREQ,
> + (0x10 << PG_BLUE_VERT_INIT_FREQ_OFFSET) |
> + (0x10 << PG_BLUE_HOR_INIT_FREQ_OFFSET));
> + tpg_write(port, TEGRA_CSI_PG_BLUE_FREQ_RATE, 0x0);
> + }
> +
> + pp_write(port, TEGRA_CSI_PIXEL_STREAM_PP_COMMAND,
> + (0xF << CSI_PP_START_MARKER_FRAME_MAX_OFFSET) |
> + CSI_PP_SINGLE_SHOT_ENABLE | CSI_PP_ENABLE);
> + } else {
> + u32 val = pp_read(port, TEGRA_CSI_PIXEL_PARSER_STATUS);
> +
> + dev_dbg(csi->dev, "TEGRA_CSI_PIXEL_PARSER_STATUS 0x%08x\n",
> + val);
Are these still useful? I notice that you don't have debug output for
the case where enable == true.
> +
> + val = cil_read(port, port_num, TEGRA_CSI_CIL_STATUS);
> + dev_dbg(csi->dev, "TEGRA_CSI_CIL_STATUS 0x%08x\n", val);
> +
> + val = cil_read(port, port_num, TEGRA_CSI_CILX_STATUS);
> + dev_dbg(csi->dev, "TEGRA_CSI_CILX_STATUS 0x%08x\n", val);
> +
> + pp_write(port, TEGRA_CSI_PIXEL_STREAM_PP_COMMAND,
> + (0xF << CSI_PP_START_MARKER_FRAME_MAX_OFFSET) |
> + CSI_PP_DISABLE);
> +
> + if (pg_mode) {
> + tpg_write(port, TEGRA_CSI_PATTERN_GENERATOR_CTRL,
> + ((pg_mode - 1) << PG_MODE_OFFSET) |
> + PG_DISABLE);
> + clk_disable_unprepare(csi->tpg_clk);
> + }
> +
> + if (port->lanes == 4) {
> + csi_write(csi_chan, block, TEGRA_CSI_PHY_CIL_COMMAND,
> + CSI_A_PHY_CIL_DISABLE |
> + CSI_B_PHY_CIL_DISABLE);
> +
> + } else {
> + u32 val = ((port_num & 1) == PORT_A) ?
> + CSI_A_PHY_CIL_DISABLE | CSI_B_PHY_CIL_NOP :
> + CSI_B_PHY_CIL_DISABLE | CSI_A_PHY_CIL_NOP;
> + csi_write(csi_chan, block, TEGRA_CSI_PHY_CIL_COMMAND,
> + val);
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int csi2_hw_init(struct tegra_csi_device *csi)
> +{
> + struct tegra_csi_channel *csi_chan;
> + struct tegra_csi_port *port;
> + u8 portno;
> + int ret;
> +
> + csi->cilab_clk = devm_clk_get(csi->dev, "cilab");
> + if (IS_ERR(csi->cilab_clk)) {
> + dev_err(csi->dev, "Failed to get cilab clock\n");
Maybe output the error code here? The important thing here is to make
error messages consistent, which can simplify analysis of the kernel log
later on.
> + return PTR_ERR(csi->cilab_clk);
> + }
> +
> + csi->cilcd_clk = devm_clk_get(csi->dev, "cilcd");
> + if (IS_ERR(csi->cilcd_clk)) {
> + dev_err(csi->dev, "Failed to get cilcd clock\n");
> + return PTR_ERR(csi->cilcd_clk);
> + }
> +
> + csi->cilef_clk = devm_clk_get(csi->dev, "cile");
> + if (IS_ERR(csi->cilef_clk)) {
> + dev_err(csi->dev, "Failed to get cile clock\n");
> + return PTR_ERR(csi->cilef_clk);
> + }
> +
> + csi->tpg_clk = devm_clk_get(csi->dev, "csi_tpg");
> + if (IS_ERR(csi->tpg_clk)) {
> + dev_err(csi->dev, "Failed to get csi_tpg clock\n");
> + return PTR_ERR(csi->tpg_clk);
> + }
> +
> + csi->csi_clk = devm_clk_get(csi->dev, "csi");
> + if (IS_ERR(csi->csi_clk)) {
> + dev_err(csi->dev, "Failed to get csi clock\n");
> + return PTR_ERR(csi->csi_clk);
> + }
> +
> + ret = clk_prepare_enable(csi->csi_clk);
> + if (ret) {
> + dev_err(csi->dev, "Failed to enable csi clk, err: %d\n", ret);
> + return ret;
> + }
> +
> + list_for_each_entry(csi_chan, &csi->csi_chans, list) {
> + void __iomem *csi_pp_base;
> +
> + port = csi_chan->ports;
> + portno = csi_chan->csi_port_num;
> + csi_pp_base = csi->iomem + CSI_PP_OFFSET(portno >> 1);
> + port->pixel_parser = csi_pp_base +
> + (portno % CSI_PORTS_PER_BRICK) *
> + TEGRA210_CSI_PORT_OFFSET;
> + port->cila = csi_pp_base + TEGRA210_CSI_CIL_OFFSET;
> + port->cilb = port->cila + TEGRA210_CSI_PORT_OFFSET;
> + port->tpg = port->pixel_parser + TEGRA210_CSI_TPG_OFFSET;
> + }
> +
> + return 0;
> +}
> +
> +const struct tegra_csi_fops csi2_fops = {
> + .hw_init = csi2_hw_init,
> + .csi_start_streaming = csi2_start_streaming,
> + .csi_err_status = csi2_error_status,
> +};
> +EXPORT_SYMBOL(csi2_fops);
> diff --git a/drivers/staging/media/tegra/csi2_fops.h b/drivers/staging/media/tegra/csi2_fops.h
> new file mode 100644
> index 000000000000..cf22a28ceb1f
> --- /dev/null
> +++ b/drivers/staging/media/tegra/csi2_fops.h
> @@ -0,0 +1,15 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION. All rights reserved.
> + */
> +
> +#ifndef __CSI2_H__
> +#define __CSI2_H__
> +
> +#define TEGRA210_TPG_CLOCK 594000000
> +#define TEGRA210_CSI_CIL_CLK_MAX 102000000
> +#define TEGRA210_CSI_BRICKS_MAX 3
> +
> +extern const struct tegra_csi_fops csi2_fops;
> +
> +#endif
> diff --git a/drivers/staging/media/tegra/host1x-video.c b/drivers/staging/media/tegra/host1x-video.c
> new file mode 100644
> index 000000000000..740806121e6b
> --- /dev/null
> +++ b/drivers/staging/media/tegra/host1x-video.c
> @@ -0,0 +1,120 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION. All rights reserved.
> + */
> +
> +#include <linux/host1x.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +
> +#include "host1x-video.h"
> +
> +static int host1x_video_probe(struct host1x_device *dev)
> +{
> + struct tegra_camera *cam;
> + int ret;
> +
> + cam = devm_kzalloc(&dev->dev, sizeof(*cam), GFP_KERNEL);
> + if (!cam)
> + return -ENOMEM;
> +
> + cam->dev = get_device(&dev->dev);
> + cam->media_dev.dev = cam->dev;
> + strscpy(cam->media_dev.model, "NVIDIA Tegra Video Input Device",
> + sizeof(cam->media_dev.model));
> + cam->media_dev.hw_revision = 3;
Where does this come from?
> +
> + media_device_init(&cam->media_dev);
> + ret = media_device_register(&cam->media_dev);
> + if (ret < 0) {
> + dev_err(cam->dev, "failed to register media device: %d\n", ret);
> + return ret;
> + }
> +
> + cam->v4l2_dev.mdev = &cam->media_dev;
> + ret = v4l2_device_register(cam->dev, &cam->v4l2_dev);
> + if (ret < 0) {
> + dev_err(cam->dev, "V4L2 device registration failed: %d\n", ret);
> + goto register_error;
> + }
> +
> + dev_set_drvdata(&dev->dev, cam);
> +
> + ret = host1x_device_init(dev);
> + if (ret < 0)
> + goto dev_exit;
> +
> + return 0;
> +
> +dev_exit:
> + host1x_device_exit(dev);
There should be no need to call host1x_device_exit() when
host1x_device_init() failed because the latter already takes care of
undoing whatever it did already.
> + v4l2_device_unregister(&cam->v4l2_dev);
> +register_error:
> + media_device_unregister(&cam->media_dev);
> + media_device_cleanup(&cam->media_dev);
> +
> + return ret;
> +}
> +
> +static int host1x_video_remove(struct host1x_device *dev)
> +{
> + struct tegra_camera *cam = dev_get_drvdata(&dev->dev);
> +
> + host1x_device_exit(dev);
> + v4l2_device_unregister(&cam->v4l2_dev);
> + media_device_unregister(&cam->media_dev);
> + media_device_cleanup(&cam->media_dev);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id host1x_video_subdevs[] = {
> + { .compatible = "nvidia,tegra210-csi", },
> + { .compatible = "nvidia,tegra210-vi", },
> + { }
> +};
> +
> +static struct host1x_driver host1x_video_driver = {
> + .driver = {
> + .name = "host1x_video",
We typically use - instead of _ in names. This helps making access to
sysfs or debugfs consistent across drivers.
> + },
> + .probe = host1x_video_probe,
> + .remove = host1x_video_remove,
> + .subdevs = host1x_video_subdevs,
> +};
> +
> +static struct platform_driver * const drivers[] = {
> + &tegra_csi_driver,
> + &tegra_vi_driver,
> +};
> +
> +static int __init host1x_video_init(void)
> +{
> + int err;
> +
> + err = host1x_driver_register(&host1x_video_driver);
> + if (err < 0)
> + return err;
> +
> + err = platform_register_drivers(drivers, ARRAY_SIZE(drivers));
> + if (err < 0)
> + goto unregister_host1x;
> +
> + return 0;
> +
> +unregister_host1x:
> + host1x_driver_unregister(&host1x_video_driver);
> + return err;
> +}
> +module_init(host1x_video_init);
> +
> +static void __exit host1x_video_exit(void)
> +{
> + platform_unregister_drivers(drivers, ARRAY_SIZE(drivers));
> + host1x_driver_unregister(&host1x_video_driver);
> +}
> +module_exit(host1x_video_exit);
> +
> +MODULE_AUTHOR("Sowjanya Komatineni <skomatineni@xxxxxxxxxx>");
> +MODULE_DESCRIPTION("NVIDIA Tegra Host1x Video driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/staging/media/tegra/host1x-video.h b/drivers/staging/media/tegra/host1x-video.h
> new file mode 100644
> index 000000000000..84d28e6f4362
> --- /dev/null
> +++ b/drivers/staging/media/tegra/host1x-video.h
> @@ -0,0 +1,33 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION. All rights reserved.
> + */
> +
> +#ifndef HOST1X_VIDEO_H
> +#define HOST1X_VIDEO_H 1
> +
> +#include <linux/host1x.h>
> +
> +#include <media/media-device.h>
> +#include <media/media-entity.h>
> +#include <media/v4l2-async.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-dev.h>
> +#include <media/videobuf2-v4l2.h>
> +
> +#include "tegra-vi.h"
> +#include "csi.h"
> +
> +struct tegra_camera {
Nit: "camera" seems like a suboptimal choice because usually VI will
consume data from multiple cameras. Maybe something like "tegra_video"
would be a better name?
> + struct v4l2_device v4l2_dev;
> + struct media_device media_dev;
> + struct device *dev;
> + struct tegra_vi *vi;
> + struct tegra_csi_device *csi;
> +};
> +
> +extern struct platform_driver tegra_vi_driver;
> +extern struct platform_driver tegra_csi_driver;
> +
> +#endif /* HOST1X_VIDEO_H */
[...]
> diff --git a/drivers/staging/media/tegra/tegra-channel.c b/drivers/staging/media/tegra/tegra-channel.c
> new file mode 100644
> index 000000000000..7561f6fb8748
> --- /dev/null
> +++ b/drivers/staging/media/tegra/tegra-channel.c
> @@ -0,0 +1,628 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION. All rights reserved.
> + */
> +
> +#include <linux/atomic.h>
> +#include <linux/bitmap.h>
> +#include <linux/clk.h>
> +#include <linux/host1x.h>
> +#include <linux/kthread.h>
> +#include <linux/lcm.h>
> +#include <linux/list.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/sched.h>
> +#include <linux/slab.h>
> +
> +#include <media/v4l2-event.h>
> +#include <media/v4l2-fh.h>
> +#include <media/v4l2-ioctl.h>
> +#include <media/videobuf2-dma-contig.h>
> +
> +#include <soc/tegra/pmc.h>
> +
> +#include "mc_common.h"
> +#include "tegra-vi.h"
> +#include "host1x-video.h"
> +
> +#define MAX_CID_CONTROLS 1
> +
> +static const char *const vi_pattern_strings[] = {
> + "Black/White Direct Mode",
> + "Color Patch Mode",
> +};
> +
> +static int vi_s_ctrl(struct v4l2_ctrl *ctrl)
> +{
> + struct tegra_channel *chan = container_of(ctrl->handler,
> + struct tegra_channel,
> + ctrl_handler);
> +
> + switch (ctrl->id) {
> + case V4L2_CID_TEST_PATTERN:
> + chan->vi->pg_mode = ctrl->val + 1;
> + dev_info(chan->vi->dev, "TPG mode is set to %s\n",
> + vi_pattern_strings[ctrl->val]);
dev_dbg()?
> + break;
> +
> + default:
> + dev_err(chan->vi->dev, "Invalid Tegra video control\n");
That potentially allows an attacker to DoS by flooding the kernel log.
Isn't the -EINVAL below already going to provide enough information to
the caller? If we really want this, perhaps turn it into a dev_dbg() or
even better yet, a rate-limited dev_dbg().
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
[...]
> diff --git a/drivers/staging/media/tegra/vi2_fops.c b/drivers/staging/media/tegra/vi2_fops.c
[...]
> +const struct tegra_vi_fops vi2_fops = {
> + .vi_stride_align = vi2_stride_align,
> + .vi_start_streaming = vi2_channel_start_streaming,
> + .vi_stop_streaming = vi2_channel_stop_streaming,
> +};
> +EXPORT_SYMBOL(vi2_fops);
There should be no need to export this, unless you want to build this as
a separate module, which I don't think is a good idea.
> diff --git a/drivers/staging/media/tegra/vi2_fops.h b/drivers/staging/media/tegra/vi2_fops.h
> new file mode 100644
> index 000000000000..dcbd3ad4b642
> --- /dev/null
> +++ b/drivers/staging/media/tegra/vi2_fops.h
> @@ -0,0 +1,15 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION. All rights reserved.
> + */
> +
> +#ifndef __T210_VI_H__
> +#define __T210_VI_H__
> +
> +#define TEGRA210_CLOCK_VI_MAX 460000000
> +
> +#define TEGRA_VI_CSI_BASE(x) (0x100 + (x) * 0x100)
> +
> +extern const struct tegra_vi_fops vi2_fops;
> +
> +#endif
I've been wondering about this. So far we've got two pairs of Tegra210
specific files: vi2_fops.[ch] and csi2_fops.[ch]. Is there any reason
why we couldn't merge those two files into a single file, say,
tegra210.c?
I don't think a header file would be really necessary in that case since
only the tegra210.c file would use any of the definitions in that header
and we coul simply put the "extern" definitions into some central
location to make them available to the main driver.
These files aren't terribly huge, so merging them should result in still
fairly manageable chunks.
> diff --git a/drivers/staging/media/tegra/vi2_formats.h b/drivers/staging/media/tegra/vi2_formats.h
> new file mode 100644
> index 000000000000..416960b1c1f2
> --- /dev/null
> +++ b/drivers/staging/media/tegra/vi2_formats.h
> @@ -0,0 +1,119 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION. All rights reserved.
> + */
> +
> +#ifndef __VI2_FORMATS_H_
> +#define __VI2_FORMATS_H_
> +
> +#include "tegra-core.h"
> +
> +/*
> + * These go into the TEGRA_VI_CSI_n_IMAGE_DEF registers bits 23:16
> + * Output pixel memory format for the VI channel.
> + */
> +enum tegra_image_format {
> + TEGRA_IMAGE_FORMAT_T_L8 = 16,
> +
> + TEGRA_IMAGE_FORMAT_T_R16_I = 32,
> + TEGRA_IMAGE_FORMAT_T_B5G6R5,
> + TEGRA_IMAGE_FORMAT_T_R5G6B5,
> + TEGRA_IMAGE_FORMAT_T_A1B5G5R5,
> + TEGRA_IMAGE_FORMAT_T_A1R5G5B5,
> + TEGRA_IMAGE_FORMAT_T_B5G5R5A1,
> + TEGRA_IMAGE_FORMAT_T_R5G5B5A1,
> + TEGRA_IMAGE_FORMAT_T_A4B4G4R4,
> + TEGRA_IMAGE_FORMAT_T_A4R4G4B4,
> + TEGRA_IMAGE_FORMAT_T_B4G4R4A4,
> + TEGRA_IMAGE_FORMAT_T_R4G4B4A4,
> +
> + TEGRA_IMAGE_FORMAT_T_A8B8G8R8 = 64,
> + TEGRA_IMAGE_FORMAT_T_A8R8G8B8,
> + TEGRA_IMAGE_FORMAT_T_B8G8R8A8,
> + TEGRA_IMAGE_FORMAT_T_R8G8B8A8,
> + TEGRA_IMAGE_FORMAT_T_A2B10G10R10,
> + TEGRA_IMAGE_FORMAT_T_A2R10G10B10,
> + TEGRA_IMAGE_FORMAT_T_B10G10R10A2,
> + TEGRA_IMAGE_FORMAT_T_R10G10B10A2,
> +
> + TEGRA_IMAGE_FORMAT_T_A8Y8U8V8 = 193,
> + TEGRA_IMAGE_FORMAT_T_V8U8Y8A8,
> +
> + TEGRA_IMAGE_FORMAT_T_A2Y10U10V10 = 197,
> + TEGRA_IMAGE_FORMAT_T_V10U10Y10A2,
> + TEGRA_IMAGE_FORMAT_T_Y8_U8__Y8_V8,
> + TEGRA_IMAGE_FORMAT_T_Y8_V8__Y8_U8,
> + TEGRA_IMAGE_FORMAT_T_U8_Y8__V8_Y8,
> + TEGRA_IMAGE_FORMAT_T_V8_Y8__U8_Y8,
> +
> + TEGRA_IMAGE_FORMAT_T_Y8__U8__V8_N444 = 224,
> + TEGRA_IMAGE_FORMAT_T_Y8__U8V8_N444,
> + TEGRA_IMAGE_FORMAT_T_Y8__V8U8_N444,
> + TEGRA_IMAGE_FORMAT_T_Y8__U8__V8_N422,
> + TEGRA_IMAGE_FORMAT_T_Y8__U8V8_N422,
> + TEGRA_IMAGE_FORMAT_T_Y8__V8U8_N422,
> + TEGRA_IMAGE_FORMAT_T_Y8__U8__V8_N420,
> + TEGRA_IMAGE_FORMAT_T_Y8__U8V8_N420,
> + TEGRA_IMAGE_FORMAT_T_Y8__V8U8_N420,
> + TEGRA_IMAGE_FORMAT_T_X2LC10LB10LA10,
> + TEGRA_IMAGE_FORMAT_T_A2R6R6R6R6R6,
> +};
> +
> +static const struct tegra_video_format vi2_video_formats[] = {
> + /* RAW 8 */
> + TEGRA_VIDEO_FORMAT(RAW8, 8, SRGGB8_1X8, 1, 1, T_L8,
> + RAW8, SRGGB8, "RGRG.. GBGB.."),
> + TEGRA_VIDEO_FORMAT(RAW8, 8, SGRBG8_1X8, 1, 1, T_L8,
> + RAW8, SGRBG8, "GRGR.. BGBG.."),
> + TEGRA_VIDEO_FORMAT(RAW8, 8, SGBRG8_1X8, 1, 1, T_L8,
> + RAW8, SGBRG8, "GBGB.. RGRG.."),
> + TEGRA_VIDEO_FORMAT(RAW8, 8, SBGGR8_1X8, 1, 1, T_L8,
> + RAW8, SBGGR8, "BGBG.. GRGR.."),
> +
> + /* RAW 10 */
> + TEGRA_VIDEO_FORMAT(RAW10, 10, SRGGB10_1X10, 2, 1, T_R16_I,
> + RAW10, SRGGB10, "RGRG.. GBGB.."),
> + TEGRA_VIDEO_FORMAT(RAW10, 10, SGRBG10_1X10, 2, 1, T_R16_I,
> + RAW10, SGRBG10, "GRGR.. BGBG.."),
> + TEGRA_VIDEO_FORMAT(RAW10, 10, SGBRG10_1X10, 2, 1, T_R16_I,
> + RAW10, SGBRG10, "GBGB.. RGRG.."),
> + TEGRA_VIDEO_FORMAT(RAW10, 10, SBGGR10_1X10, 2, 1, T_R16_I,
> + RAW10, SBGGR10, "BGBG.. GRGR.."),
> +
> + /* RAW 12 */
> + TEGRA_VIDEO_FORMAT(RAW12, 12, SRGGB12_1X12, 2, 1, T_R16_I,
> + RAW12, SRGGB12, "RGRG.. GBGB.."),
> + TEGRA_VIDEO_FORMAT(RAW12, 12, SGRBG12_1X12, 2, 1, T_R16_I,
> + RAW12, SGRBG12, "GRGR.. BGBG.."),
> + TEGRA_VIDEO_FORMAT(RAW12, 12, SGBRG12_1X12, 2, 1, T_R16_I,
> + RAW12, SGBRG12, "GBGB.. RGRG.."),
> + TEGRA_VIDEO_FORMAT(RAW12, 12, SBGGR12_1X12, 2, 1, T_R16_I,
> + RAW12, SBGGR12, "BGBG.. GRGR.."),
> +
> + /* RGB888 */
> + TEGRA_VIDEO_FORMAT(RGB888, 24, RGB888_1X24, 4, 1, T_A8R8G8B8,
> + RGB888, ABGR32, "BGRA-8-8-8-8"),
> + TEGRA_VIDEO_FORMAT(RGB888, 24, RGB888_1X32_PADHI, 4, 1, T_A8B8G8R8,
> + RGB888, RGB32, "RGB-8-8-8-8"),
> +
> + /* YUV422 */
> + TEGRA_VIDEO_FORMAT(YUV422, 16, UYVY8_1X16, 2, 1, T_U8_Y8__V8_Y8,
> + YUV422_8, UYVY, "YUV 4:2:2"),
> + TEGRA_VIDEO_FORMAT(YUV422, 16, VYUY8_1X16, 2, 1, T_V8_Y8__U8_Y8,
> + YUV422_8, VYUY, "YUV 4:2:2"),
> + TEGRA_VIDEO_FORMAT(YUV422, 16, YUYV8_1X16, 2, 1, T_Y8_U8__Y8_V8,
> + YUV422_8, YUYV, "YUV 4:2:2"),
> + TEGRA_VIDEO_FORMAT(YUV422, 16, YVYU8_1X16, 2, 1, T_Y8_V8__Y8_U8,
> + YUV422_8, YVYU, "YUV 4:2:2"),
> + TEGRA_VIDEO_FORMAT(YUV422, 16, UYVY8_1X16, 1, 1, T_Y8__V8U8_N422,
> + YUV422_8, NV16, "NV16"),
> + TEGRA_VIDEO_FORMAT(YUV422, 16, UYVY8_2X8, 2, 1, T_U8_Y8__V8_Y8,
> + YUV422_8, UYVY, "YUV 4:2:2 UYVY"),
> + TEGRA_VIDEO_FORMAT(YUV422, 16, VYUY8_2X8, 2, 1, T_V8_Y8__U8_Y8,
> + YUV422_8, VYUY, "YUV 4:2:2 VYUY"),
> + TEGRA_VIDEO_FORMAT(YUV422, 16, YUYV8_2X8, 2, 1, T_Y8_U8__Y8_V8,
> + YUV422_8, YUYV, "YUV 4:2:2 YUYV"),
> + TEGRA_VIDEO_FORMAT(YUV422, 16, YVYU8_2X8, 2, 1, T_Y8_V8__Y8_U8,
> + YUV422_8, YVYU, "YUV 4:2:2 YVYU"),
> +};
Does this table perhaps also belong in tegra210.c?
> +#endif
> diff --git a/drivers/staging/media/tegra/vi2_registers.h b/drivers/staging/media/tegra/vi2_registers.h
> new file mode 100644
> index 000000000000..c54a6a3aa1c4
> --- /dev/null
> +++ b/drivers/staging/media/tegra/vi2_registers.h
> @@ -0,0 +1,194 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 NVIDIA CORPORATION. All rights reserved.
> + */
> +
> +#ifndef __REGISTERS_H__
> +#define __REGISTERS_H__
> +
> +#define TEGRA_CLOCK_VI_MAX 793600000
> +#define TEGRA210_SURFACE_ALIGNMENT 64
> +#define TEGRA210_MAX_CHANNELS 6
> +
> +/* Tegra210 VI registers */
If these are Tegra210-specific, are they accessed outside of Tegra210-
specific code? If not, they may be better located in that new tegra210.c
source file as well. That way it becomes a lot easier to distinguish
between generic, perhaps parameterized, core code and the SoC generation
specific code.
Thierry
Attachment:
signature.asc
Description: PGP signature
