Re: [alsa-devel] [Linux-kernel] [PATCH v5 2/7] ASoC: tegra: Allow 24bit and 32bit samples

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 27/01/2020 19:20, Dmitry Osipenko wrote:
24.01.2020 19:50, Jon Hunter пишет:

On 23/01/2020 19:38, Ben Dooks wrote:
On 07/01/2020 01:39, Dmitry Osipenko wrote:
06.01.2020 22:00, Ben Dooks пишет:
On 05/01/2020 10:53, Ben Dooks wrote:


On 2020-01-05 01:48, Dmitry Osipenko wrote:
05.01.2020 03:04, Ben Dooks пишет:
[snip]

I've just gone through testing.

Some simple data tests show 16 and 32-bits work.

The 24 bit case seems to be weird, it looks like the 24-bit expects
24 bit samples in 32 bit words. I can't see any packing options to
do 24 bit in 24 bit, so we may have to remove 24 bit sample support
(which is a shame)

My preference is to remove the 24-bit support and keep the 32 bit in.


Interesting.. Jon, could you please confirm that 24bit format isn't
usable on T30?

If there is an option of 24 packed into 32, then I think that would
work.

I can try testing that with raw data on Monday.

I need to check some things, I assumed 24 was 24 packed bits, it looks
like the default is 24 in 32 bits so we may be ok. However I need to
re-write my test case which assumed it was 24bits in 3 bytes (S24_3LE).

I'll follow up later,

Okay, the S24_3LE isn't supported by RT5640 codec in my case. I briefly
looked through the TRM doc and got impression that AHUB could re-pack
data stream into something that codec supports, but maybe it's a wrong
impression.
_________________________________

I did a quick test with the following:

  sox -n -b 16 -c 2 -r 44100 /tmp/tmp.wav  synth sine 500 vol 0.5
  sox -n -b 24 -c 2 -r 44100 /tmp/tmp.wav  synth sine 500 vol 0.5
  sox -n -b 32 -c 2 -r 44100 /tmp/tmp.wav  synth sine 500 vol 0.5

The 16 and 32 work fine, the 24 is showing a playback output freq
of 440Hz instead of 500Hz... this suggests the clock is off, or there
is something else weird going on...

I was looking at using sox to create such as file, but the above command
generates a S24_3LE file and not S24_LE file. The codec on Jetson-TK1
supports S24_LE but does not support S24_3LE and so I cannot test this.
Anyway, we really need to test S24_LE and not S24_3LE because this is
the problem that Dmitry is having.

Ben is S24_3LE what you really need to support?

Dmitry, does the following fix your problem?

diff --git a/sound/soc/tegra/tegra30_i2s.c b/sound/soc/tegra/tegra30_i2s.c
index dbed3c5408e7..92845c4b63f4 100644
--- a/sound/soc/tegra/tegra30_i2s.c
+++ b/sound/soc/tegra/tegra30_i2s.c
@@ -140,7 +140,7 @@ static int tegra30_i2s_hw_params(struct
snd_pcm_substream *substream,
                 audio_bits = TEGRA30_AUDIOCIF_BITS_16;
                 sample_size = 16;
                 break;
-       case SNDRV_PCM_FORMAT_S24_LE:
+       case SNDRV_PCM_FORMAT_S24_3LE:
                 val = TEGRA30_I2S_CTRL_BIT_SIZE_24;
                 audio_bits = TEGRA30_AUDIOCIF_BITS_24;
                 sample_size = 24;
@@ -318,7 +318,7 @@ static const struct snd_soc_dai_driver
tegra30_i2s_dai_template = {
                 .channels_max = 2,
                 .rates = SNDRV_PCM_RATE_8000_96000,
                 .formats = SNDRV_PCM_FMTBIT_S32_LE |
-                          SNDRV_PCM_FMTBIT_S24_LE |
+                          SNDRV_PCM_FMTBIT_S24_3LE |
                            SNDRV_PCM_FMTBIT_S16_LE,
         },
         .capture = {
@@ -327,7 +327,7 @@ static const struct snd_soc_dai_driver
tegra30_i2s_dai_template = {
                 .channels_max = 2,
                 .rates = SNDRV_PCM_RATE_8000_96000,
                 .formats = SNDRV_PCM_FMTBIT_S32_LE |
-                          SNDRV_PCM_FMTBIT_S24_LE |
+                          SNDRV_PCM_FMTBIT_S24_3LE |
                            SNDRV_PCM_FMTBIT_S16_LE,
         },
         .ops = &tegra30_i2s_dai_ops,

Jon


It should solve the problem in my particular case, but I'm not sure that
the solution is correct.

The v5.5 kernel is released now with the broken audio and apparently
getting 24bit to work won't be trivial (if possible at all). Ben, could
you please send a patch to fix v5.5 by removing the S24 support
advertisement from the driver?

That might be the best for the moment.

As far as my testing so far is that just the audio rate is off
.
It might be worth putting it in as a config option or run time
command option?


--
Ben Dooks				http://www.codethink.co.uk/
Senior Engineer				Codethink - Providing Genius

https://www.codethink.co.uk/privacy.html



[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux