From: Thierry Reding <treding@xxxxxxxxxx>
Document the interconnects property that is used to describe the paths
from and to system memory from and to the BPMP.
Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
---
Rob, Georgi,
after the initial RFC that I did for adding interconnect properties on
Tegra, I realized that the description wasn't complete. This is an
attempt at a more accurate description, but unfortunately I'm not sure
if it's even correct in terms of the interconnect bindings.
The problem here is that on Tegra, each device has multiple paths to
system memory, and I have no good idea on what to pick as the default.
They are all basically the same path, but each provides extra controls
to configure the "interconnect".
Any ideas on how to resolve this? Let me know if the DT bindings and
example don't make things clear enough.
Thierry
.../firmware/nvidia,tegra186-bpmp.yaml | 59 +++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.yaml b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.yaml
index dabf1c1aec2f..d40fcd836e90 100644
--- a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.yaml
+++ b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.yaml
@@ -43,6 +43,24 @@ properties:
- enum:
- nvidia,tegra186-bpmp
+ interconnects:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: A list of phandle and specifier pairs that describe the
+ interconnect paths to and from the BPMP.
+
+ interconnect-names:
+ $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+ description: One string for each pair of phandle and specifier in the
+ "interconnects" property.
+ # XXX We need at least one of these to be named dma-mem so that the core
+ # will set the DMA mask based on the DMA parent, but all of these go to
+ # system memory eventually.
+ items:
+ - const: dma-mem
+ - const: dma-mem
+ - const: dma-mem
+ - const: dma-mem
+
iommus:
$ref: /schemas/types.yaml#/definitions/phandle-array
description: |
@@ -152,8 +170,43 @@ additionalProperties: false
examples:
- |
+ #include <dt-bindings/clock/tegra186-clock.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mailbox/tegra186-hsp.h>
+ #include <dt-bindings/memory/tegra186-mc.h>
+
+ mc: memory-controller@2c00000 {
+ compatible = "nvidia,tegra186-mc";
+ reg = <0x02c00000 0xb0000>;
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+
+ #interconnect-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ranges = <0x02c00000 0x0 0x02c00000 0x0 0xb0000>;
+
+ /*
+ * Memory clients have access to all 40 bits that the memory
+ * controller can address.
+ */
+ dma-ranges = <0x0 0x0 0x0 0x100 0x0>;
+
+ #memory-controller-cells = <0>;
+
+ emc: external-memory-controller@2c60000 {
+ compatible = "nvidia,tegra186-emc";
+ reg = <0x0 0x02c60000 0x0 0x50000>;
+ interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA186_CLK_EMC>;
+ clock-names = "emc";
+
+ #interconnect-cells = <0>;
+
+ nvidia,bpmp = <&bpmp>;
+ };
+ };
hsp_top0: hsp@3c00000 {
compatible = "nvidia,tegra186-hsp";
@@ -187,6 +240,12 @@ examples:
bpmp {
compatible = "nvidia,tegra186-bpmp";
+ interconnects = <&emc &mc TEGRA186_MEMORY_CLIENT_BPMPR>,
+ <&mc TEGRA186_MEMORY_CLIENT_BPMPW &emc>,
+ <&emc &mc TEGRA186_MEMORY_CLIENT_BPMPDMAR>,
+ <&mc TEGRA186_MEMORY_CLIENT_BPMPDMAW &emc>;
+ interconnect-names = "dma-mem", "dma-mem", "dma-mem", "dma-mem";
+
iommus = <&smmu TEGRA186_SID_BPMP>;
mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB TEGRA_HSP_DB_MASTER_BPMP>;
shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>;
--
2.24.1
