Add device-tree binding documentation for the XUSB device mode controller present on Tegra210 and Tegra186 SoC. This controller supports the USB 3.0 specification. Signed-off-by: Nagarjuna Kristam <nkristam@xxxxxxxxxx> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> Acked-by: Thierry Reding <treding@xxxxxxxxxx> --- V3: - Added Reviewed-by and Acked-by updates to commit message. --- V2: - used enum instead of oneOf and const. - Moved reg, reg-names, clocks, clock-names to property section from allOf. - Limited allOf to min and max items based on soc. - Updated description for power-domains. - Added V1 reference --- V1 - This document is yaml version of [1], with difference of usb-role-switch removal. [1] https://patchwork.kernel.org/patch/11156253/ --- .../devicetree/bindings/usb/nvidia,tegra-xudc.yaml | 190 +++++++++++++++++++++ 1 file changed, 190 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml new file mode 100644 index 0000000..b84ed8e --- /dev/null +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml @@ -0,0 +1,190 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/usb/nvidia,tegra-xudc.yaml#"; +$schema: "http://devicetree.org/meta-schemas/core.yaml#"; + +title: Device tree binding for NVIDIA Tegra XUSB device mode controller (XUDC) + +description: + The Tegra XUDC controller supports both USB 2.0 HighSpeed/FullSpeed and + USB 3.0 SuperSpeed protocols. + +maintainers: + - Nagarjuna Kristam <nkristam@xxxxxxxxxx> + - JC Kuo <jckuo@xxxxxxxxxx> + - Thierry Reding <treding@xxxxxxxxxx> + +properties: + compatible: + items: + - enum: + - nvidia,tegra210-xudc # For Tegra210 + - nvidia,tegra186-xudc # For Tegra186 + + reg: + minItems: 2 + maxItems: 3 + items: + - description: XUSB device controller registers + - description: XUSB device PCI Config registers + - description: XUSB device registers. + + reg-names: + minItems: 2 + maxItems: 3 + items: + - const: base + - const: fpci + - const: ipfs + + interrupts: + maxItems: 1 + description: Must contain the XUSB device interrupt. + + clocks: + minItems: 4 + maxItems: 5 + items: + - description: Clock to enable core XUSB dev clock. + - description: Clock to enable XUSB super speed clock. + - description: Clock to enable XUSB super speed dev clock. + - description: Clock to enable XUSB high speed dev clock. + - description: Clock to enable XUSB full speed dev clock. + + clock-names: + minItems: 4 + maxItems: 5 + items: + - const: dev + - const: ss + - const: ss_src + - const: fs_src + - const: hs_src + + power-domains: + maxItems: 2 + items: + - description: XUSBB(device) power-domain + - description: XUSBA(superspeed) power-domain + + power-domain-names: + maxItems: 2 + items: + - const: dev + - const: ss + + nvidia,xusb-padctl: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + phandle to the XUSB pad controller that is used to configure the USB pads + used by the XUDC controller. + + phys: + minItems: 1 + description: + Must contain an entry for each entry in phy-names. + See ../phy/phy-bindings.txt for details. + + phy-names: + minItems: 1 + items: + - const: usb2-0 + - const: usb2-1 + - const: usb2-2 + - const: usb2-3 + - const: usb3-0 + - const: usb3-1 + - const: usb3-2 + - const: usb3-3 + + avddio-usb-supply: + description: PCIe/USB3 analog logic power supply. Must supply 1.05 V. + + hvdd-usb-supply: + description: USB controller power supply. Must supply 3.3 V. + +required: + - compatible + - reg + - reg-names + - interrupts + - clocks + - clock-names + - power-domains + - power-domain-names + - nvidia,xusb-padctl + - phys + - phy-names + +allOf: + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra210-xudc + then: + properties: + reg: + minItems: 3 + reg-names: + minItems: 3 + clocks: + minItems: 5 + clock-names: + minItems: 5 + required: + - avddio-usb-supply + - hvdd-usb-supply + + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra186-xudc + then: + properties: + reg: + maxItems: 2 + reg-names: + maxItems: 2 + clocks: + maxItems: 4 + clock-names: + maxItems: 4 + +examples: + - | + #include <dt-bindings/clock/tegra210-car.h> + #include <dt-bindings/gpio/tegra-gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + usb@700d0000 { + compatible = "nvidia,tegra210-xudc"; + reg = <0x0 0x700d0000 0x0 0x8000>, + <0x0 0x700d8000 0x0 0x1000>, + <0x0 0x700d9000 0x0 0x1000>; + reg-names = "base", "fpci", "ipfs"; + + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&tegra_car TEGRA210_CLK_XUSB_DEV>, + <&tegra_car TEGRA210_CLK_XUSB_SS>, + <&tegra_car TEGRA210_CLK_XUSB_SSP_SRC>, + <&tegra_car TEGRA210_CLK_XUSB_FS_SRC>, + <&tegra_car TEGRA210_CLK_XUSB_HS_SRC>; + clock-names = "dev", "ss", "ss_src", "fs_src", "hs_src"; + + power-domains = <&pd_xusbdev>, <&pd_xusbss>; + power-domain-names = "dev", "ss"; + + nvidia,xusb-padctl = <&padctl>; + + phys = <µ_b>; + phy-names = "usb2-0"; + + avddio-usb-supply = <&vdd_pex_1v05>; + hvdd-usb-supply = <&vdd_3v3_sys>; + }; -- 2.7.4
