[PATCH v2 1/6] i2c: tegra: Fix suspending in active runtime PM state

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I noticed that sometime I2C clock is kept enabled during suspend-resume.
This happens because runtime PM defers dynamic suspension and thus it may
happen that runtime PM is in active state when system enters into suspend.
In particular I2C controller that is used for CPU's DVFS is often kept ON
during suspend because CPU's voltage scaling happens quite often.

Fixes: 8ebf15e9c869 ("i2c: tegra: Move suspend handling to NOIRQ phase")
Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
---
 drivers/i2c/busses/i2c-tegra.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index a98bf31d0e5c..79d19f6ce94e 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -1710,9 +1710,14 @@ static int tegra_i2c_remove(struct platform_device *pdev)
 static int __maybe_unused tegra_i2c_suspend(struct device *dev)
 {
 	struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
+	int err;
 
 	i2c_mark_adapter_suspended(&i2c_dev->adapter);
 
+	err = pm_runtime_force_suspend(dev);
+	if (err < 0)
+		return err;
+
 	return 0;
 }
 
@@ -1733,6 +1738,10 @@ static int __maybe_unused tegra_i2c_resume(struct device *dev)
 	if (err)
 		return err;
 
+	err = pm_runtime_force_resume(dev);
+	if (err < 0)
+		return err;
+
 	i2c_mark_adapter_resumed(&i2c_dev->adapter);
 
 	return 0;
-- 
2.24.0




[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux