20.12.2019 06:56, Peter Chen пишет:
> On 19-12-20 04:52:38, Dmitry Osipenko wrote:
>> Now, when ci_hdrc_tegra kernel module is loaded, the phy_tegra_usb module
>> is loaded too regardless of kernel's configuration. Previously this
>> problem was masked because Tegra's EHCI driver is usually enabled in
>> kernel's config and thus PHY driver was getting loaded because of it, but
>> now I was making some more thorough testing and noticed that PHY's module
>> isn't getting auto-loaded without the host driver.
>>
>> Note that ChipIdea's driver doesn't use any of the exported functions of
>> phy_tegra_usb module and thus the module needs to be requested explicitly.
>>
>> Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
>> ---
>> drivers/usb/chipidea/Kconfig | 1 +
>> drivers/usb/chipidea/ci_hdrc_tegra.c | 6 ++++++
>> 2 files changed, 7 insertions(+)
>>
>> diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig
>> index ae850b3fddf2..d53db520e209 100644
>> --- a/drivers/usb/chipidea/Kconfig
>> +++ b/drivers/usb/chipidea/Kconfig
>> @@ -7,6 +7,7 @@ config USB_CHIPIDEA
>> select RESET_CONTROLLER
>> select USB_ULPI_BUS
>> select USB_ROLE_SWITCH
>> + select USB_TEGRA_PHY if ARCH_TEGRA
>> help
>> Say Y here if your system has a dual role high speed USB
>> controller based on ChipIdea silicon IP. It supports:
>> diff --git a/drivers/usb/chipidea/ci_hdrc_tegra.c b/drivers/usb/chipidea/ci_hdrc_tegra.c
>> index 7455df0ede49..8bc11100245d 100644
>> --- a/drivers/usb/chipidea/ci_hdrc_tegra.c
>> +++ b/drivers/usb/chipidea/ci_hdrc_tegra.c
>> @@ -53,6 +53,12 @@ static int tegra_udc_probe(struct platform_device *pdev)
>> struct tegra_udc *udc;
>> int err;
>>
>> + if (IS_MODULE(CONFIG_USB_TEGRA_PHY)) {
>> + err = request_module("phy_tegra_usb");
>> + if (err)
>> + return err;
>> + }
>> +
>
> Why you do this dependency, if this controller driver can't
> get USB PHY, it should return error. What's the return value
> after calling below:
>
> udc->phy = devm_usb_get_phy_by_phandle(&pdev->dev, "nvidia,phy", 0);
It returns -EPROBE_DEFER when phy_tegra_usb isn't loaded.
So if you'll do:
# rmmod ci_hdrc_tegra; rmmod ci_hdrc; rmmod phy_tegra_usb;
# modprobe ci_hdrc_tegra
# lsmod
Module Size Used by
ci_hdrc_tegra 16384 0
ci_hdrc 45056 1 ci_hdrc_tegra
After this patch:
# rmmod ci_hdrc_tegra; rmmod ci_hdrc; rmmod phy_tegra_usb;
# modprobe ci_hdrc_tegra
# lsmod
Module Size Used by
Module Size Used by
phy_tegra_usb 20480 1
ci_hdrc_tegra 16384 0
ci_hdrc 45056 1 ci_hdrc_tegra
