The early-resume code shall not switch CPU to PLLX because PLLX configuration could be unstable or PLLX should be simply disabled if CPU enters into suspend running off some other PLL (the case if CPUFREQ driver is active). The actual burst policy is restored by the clock drivers. Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx> --- arch/arm/mach-tegra/sleep-tegra30.S | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S index 3341a12bbb9c..9a20c93abe48 100644 --- a/arch/arm/mach-tegra/sleep-tegra30.S +++ b/arch/arm/mach-tegra/sleep-tegra30.S @@ -383,11 +383,8 @@ _pll_m_c_x_done: ldr r4, [r5, #0x1C] @ restore SCLK_BURST str r4, [r0, #CLK_RESET_SCLK_BURST] - cmp r10, #TEGRA30 - movweq r4, #:lower16:((1 << 28) | (0x8)) @ burst policy is PLLX - movteq r4, #:upper16:((1 << 28) | (0x8)) - movwne r4, #:lower16:((1 << 28) | (0xe)) - movtne r4, #:upper16:((1 << 28) | (0xe)) + movw r4, #:lower16:((1 << 28) | (0x4)) @ burst policy is PLLP + movt r4, #:upper16:((1 << 28) | (0x4)) str r4, [r0, #CLK_RESET_CCLK_BURST] /* Restore pad power state to normal */ -- 2.24.0
