On Mon, Dec 2, 2019 at 12:33 PM Sam Ravnborg <sam@xxxxxxxxxxxx> wrote: > > This patchset include a couple of different > things - all related to panels. > > - The panel callbacks are optional - so drop error if > callback is not present. > > - Add support for backlight in drm_panel. > This allows us to make much simpler backlight > support to most panels. > The patchset include conversion of most of the > trivial cases. > > - Drop drm_connector from drm_panel. > This change required many changes to most > panels and many bridges and display drivers. > This is by far the most invasive change in this patchset. > > - Drop the unused get_timings() callback. > No users, so no need to keep it around. > > With this patchset drm_panel_(attach|detach) are nop's > but they are kept for now. > > A few of these patches has been sent out before - but versioning > started again from v1 - as the most patches are new. > > I have tested the panel-simple changes, and thus some > of the infrastructure changes. > The testing was done on an earlier iteration - and I ended > up submitting this as Laurent and others started to depend on it. > Jitao has a patch to add more callbacks, and I wanted the > simplification of the callbacks before we add more callbacks. > > Sam > > > Sam Ravnborg (26): > drm/drm_panel: no error when no callback > drm/panel: add backlight support > drm/panel: simple: use drm_panel backlight support > drm: get drm_bridge_panel connector via helper > drm/panel: add drm_connector argument to get_modes() > drm/panel: decouple connector from drm_panel > drm/panel: remove get_timings > drm/panel: drop drm_device from drm_panel > drm/panel: feiyang-fy07024di26a30d: use drm_panel backlight support > drm/panel: ilitek-ili9881c: use drm_panel backlight support > drm/panel: innolux-p079zca: use drm_panel backlight support > drm/panel: kingdisplay-kd097d04: use drm_panel backlight support > drm/panel: lvds: use drm_panel backlight support > drm/panel: olimex-lcd-olinuxino: use drm_panel backlight support > drm/panel: osd-osd101t2587-53ts: use drm_panel backlight support > drm/panel: panasonic-vvx10f034n00: use drm_panel backlight support > drm/panel: raydium-rm68200: use drm_panel backlight support > drm/panel: rocktech-jh057n00900: use drm_panel backlight support > drm/panel: ronbo-rb070d30: use drm_panel backlight support > drm/panel: seiko-43wvf1g: use drm_panel backlight support > drm/panel: sharp-lq101r1sx01: use drm_panel backlight support > drm/panel: sharp-ls043t1le01: use drm_panel backlight support > drm/panel: sitronix-st7701: use drm_panel backlight support > drm/panel: sitronix-st7789v: use drm_panel backlight support > drm/panel: tpo-td028ttec1: use drm_panel backlight support > drm/panel: tpo-tpg110: use drm_panel backlight support > > drivers/gpu/drm/bridge/analogix/analogix-anx6345.c | 2 +- > drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 2 +- > drivers/gpu/drm/bridge/panel.c | 18 +++- > drivers/gpu/drm/bridge/parade-ps8622.c | 2 +- > drivers/gpu/drm/bridge/tc358764.c | 2 +- > drivers/gpu/drm/bridge/tc358767.c | 2 +- > drivers/gpu/drm/bridge/ti-sn65dsi86.c | 2 +- > drivers/gpu/drm/drm_panel.c | 96 ++++++++++++++---- > drivers/gpu/drm/exynos/exynos_drm_dpi.c | 2 +- > drivers/gpu/drm/exynos/exynos_drm_dsi.c | 2 +- > drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c | 2 +- > drivers/gpu/drm/imx/imx-ldb.c | 2 +- > drivers/gpu/drm/imx/parallel-display.c | 2 +- > drivers/gpu/drm/mediatek/mtk_dsi.c | 2 +- > .../gpu/drm/msm/disp/mdp4/mdp4_lvds_connector.c | 2 +- > drivers/gpu/drm/msm/dsi/dsi_manager.c | 2 +- How come the diff stat in the cover letter here indicates a change to this file, yet I cannot find a change to this file in any of the patches? What am I missing?
