[PATCH v1 15/17] dt-bindings: tegra186-pmc: Add Tegra PMC clock bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Document clock bindings for pmc clocks clk_out_1, clk_out_2 and clk_out_3.
These clocks are part of Tegra PMC block and pmc node is the provider for
these clocks.

Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
---
 .../bindings/arm/tegra/nvidia,tegra186-pmc.txt     | 44 ++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt
index 2d89cdc39eb0..4576de92e4cc 100644
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt
@@ -12,6 +12,10 @@ Required properties:
   - "aotag"
   - "scratch"
   - "misc" (Only for Tegra194)
+- #clock-cells : Should be 1 for Tegra30 and higher.
+  In clock consumers, this cell represents the PMC clock ID.
+  The assignments may be found in header file
+  <dt-bindings/soc/tegra-pmc.h>.
 
 Optional properties:
 - nvidia,invert-interrupt: If present, inverts the PMU interrupt signal.
@@ -130,3 +134,43 @@ Pinctrl client example:
 		pinctrl-1 = <&hdmi_on>;
 		pinctrl-names = "hdmi-on", "hdmi-off";
 	};
+
+== Clock Control ==
+
+Tegra PMC has 3 clocks clk_1, clk_2 and clk_3. Each of these clocks has
+source selection and enable/disable gate.
+Parent/source for these clocks can be either of clk_m, clk_m_div2, clk_m_div4,
+or extern clock from Tegra CAR module.
+
+Clock configuration example:
+	pmc: pmc@7000e400 {
+		compatible = "nvidia,tegra186-pmc";
+		reg = <0 0x0c360000 0 0x10000>,
+		      <0 0x0c370000 0 0x10000>,
+		      <0 0x0c380000 0 0x10000>,
+		      <0 0x0c390000 0 0x10000>;
+		reg-names = "pmc", "wake", "aotag", "scratch";
+		...
+		#clock-cells = <1>;
+		...
+	};
+
+Clock consumer example:
+	host1x@50000000 {
+		...
+		vi@54080000 {
+		...
+		assigned-clocks = <&pmc TEGRA_PMC_CLK_OUT_3_MUX>;
+		assigned-clock-parents = <&tegra_car TEGRA210_CLK_EXTERN3>;
+		};
+		...
+	};
+	...
+	i2c@7000c500 {
+		cam_sensor {
+		...
+		clocks = <&pmc TEGRA_PMC_CLK_OUT_3>;
+		clock-names = "mclk";
+		...
+		};
+	};
-- 
2.7.4




[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux