pm_runtime_irq_safe is not needed as interrupts are allowed during suspend and resume. This was added mistakenly during dfll suspend and resume support patch. This patch includes fix to remove pm_runtime_irq_safe. Also updated description of dfll_suspend argument. Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx> --- drivers/clk/tegra/clk-dfll.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/clk/tegra/clk-dfll.c b/drivers/clk/tegra/clk-dfll.c index c051d92c2bbf..cfbaa90c7adb 100644 --- a/drivers/clk/tegra/clk-dfll.c +++ b/drivers/clk/tegra/clk-dfll.c @@ -1487,7 +1487,6 @@ static int dfll_init(struct tegra_dfll *td) td->last_unrounded_rate = 0; pm_runtime_enable(td->dev); - pm_runtime_irq_safe(td->dev); pm_runtime_get_sync(td->dev); dfll_set_mode(td, DFLL_DISABLED); @@ -1516,7 +1515,7 @@ static int dfll_init(struct tegra_dfll *td) /** * tegra_dfll_suspend - check DFLL is disabled - * @dev: DFLL device * + * @dev: DFLL instance * * DFLL clock should be disabled by the CPUFreq driver. So, make * sure it is disabled and disable all clocks needed by the DFLL. -- 2.7.4
