Hello,
This series moves intermediate-clk handling from tegra20-cpufreq into
tegra-clk driver. This allows us to switch to generic cpufreq-dt driver
which brings voltage scaling, per-hardware OPPs and Tegra30 support out
of the box. All boards need to adopt CPU OPPs in their device-trees in
order to get cpufreq support.
Changelog:
v4: - Updated CCLK diagram in the "Add custom CCLK implementation" patch.
- <linux/cpu.h> is now included in the "Use generic cpufreq-dt driver"
patch, for consistency.
- Returned value of get_cpu_device() is now checked in the "Use generic
cpufreq-dt driver" patch, for consistency as well.
v3: - The "Add custom CCLK implementation" patch was updated in accordance
to the comments from Peter De Schrijver. We will not use the clock
skipper.
- Re added OPPs for T30 Beaver board because Thierry has that board ;)
- Added r-b for the "DT binding" patch from Rob Herring.
v2: - Kept modularity of the tegra20-cpufreq as was requested by Viresh Kumar
in a review comment to v1.
- Added acks from Viresh Kumar.
- Added tested-by from Nicolas Chauvet to the "trimslice" patch.
Nicolas told me on IRC that it works fine.
- Fixed compilation of the "Add custom CCLK implementation" patch. The
error happened because v1 was based on top of yet unreviewed/unapplied
patch "clk: tegra: divider: Support enable-bit for Super clocks".
Thanks to Peter Geis for reporting the problem.
- Replaced Tegra30 "beaver" board with "cardhu-a04" because turned out
that's what NVIDIA uses in the testing farm.
Dmitry Osipenko (10):
clk: tegra: Add custom CCLK implementation
clk: tegra: pll: Add pre/post rate-change hooks
clk: tegra: cclk: Add helpers for handling PLLX rate changes
clk: tegra20: Use custom CCLK implementation
clk: tegra30: Use custom CCLK implementation
dt-bindings: cpufreq: Add binding for NVIDIA Tegra20/30
cpufreq: tegra20: Use generic cpufreq-dt driver (Tegra30 supported
now)
ARM: tegra: Create tegra20-cpufreq platform device on Tegra30
ARM: dts: tegra30: beaver: Set up voltage regulators for DVFS
ARM: dts: tegra30: beaver: Add CPU Operating Performance Points
.../cpufreq/nvidia,tegra20-cpufreq.txt | 56 +++++
arch/arm/boot/dts/tegra30-beaver.dts | 40 +++-
arch/arm/mach-tegra/tegra.c | 4 +
drivers/clk/tegra/Makefile | 1 +
drivers/clk/tegra/clk-pll.c | 12 +-
drivers/clk/tegra/clk-tegra-super-cclk.c | 212 +++++++++++++++++
drivers/clk/tegra/clk-tegra20.c | 7 +-
drivers/clk/tegra/clk-tegra30.c | 6 +-
drivers/clk/tegra/clk.h | 19 +-
drivers/cpufreq/Kconfig.arm | 6 +-
drivers/cpufreq/cpufreq-dt-platdev.c | 2 +
drivers/cpufreq/tegra20-cpufreq.c | 217 +++++-------------
12 files changed, 408 insertions(+), 174 deletions(-)
create mode 100644 Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt
create mode 100644 drivers/clk/tegra/clk-tegra-super-cclk.c
--
2.23.0
