Re: [PATCH 09/11] thermal: tegra: Appease the kernel-doc deity

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 06-11-19, 18:58, Amit Kucheria wrote:
> Fix up the following warning when compiled with make W=1:
> 
> linux.git/drivers/thermal/tegra/soctherm.c:369: warning: Function parameter or member 'value' not described in 'ccroc_writel'
> linux.git/drivers/thermal/tegra/soctherm.c:369: warning: Excess function parameter 'v' description in 'ccroc_writel'
> linux.git/drivers/thermal/tegra/soctherm.c:447: warning: Function parameter or member 'dev' not described in 'enforce_temp_range'
> linux.git/drivers/thermal/tegra/soctherm.c:772: warning: Function parameter or member 'sg' not described in 'tegra_soctherm_set_hwtrips'
> linux.git/drivers/thermal/tegra/soctherm.c:772: warning: Function parameter or member 'tz' not described in 'tegra_soctherm_set_hwtrips'
> linux.git/drivers/thermal/tegra/soctherm.c:944: warning: Function parameter or member 'ts' not described in 'soctherm_oc_intr_enable'
> linux.git/drivers/thermal/tegra/soctherm.c:1167: warning: Function parameter or member 'data' not described in 'soctherm_oc_irq_disable'
> linux.git/drivers/thermal/tegra/soctherm.c:1167: warning: Excess function parameter 'irq_data' description in 'soctherm_oc_irq_disable'
> linux.git/drivers/thermal/tegra/soctherm.c:1224: warning: Function parameter or member 'ctrlr' not described in 'soctherm_irq_domain_xlate_twocell'
> linux.git/drivers/thermal/tegra/soctherm.c:1686: warning: Function parameter or member 'pdev' not described in 'soctherm_init_hw_throt_cdev'
> linux.git/drivers/thermal/tegra/soctherm.c:1764: warning: Function parameter or member 'ts' not described in 'throttlectl_cpu_level_cfg'
> linux.git/drivers/thermal/tegra/soctherm.c:1812: warning: Function parameter or member 'ts' not described in 'throttlectl_cpu_level_select'
> linux.git/drivers/thermal/tegra/soctherm.c:1855: warning: Function parameter or member 'ts' not described in 'throttlectl_cpu_mn'
> linux.git/drivers/thermal/tegra/soctherm.c:1886: warning: Function parameter or member 'ts' not described in 'throttlectl_gpu_level_select'
> linux.git/drivers/thermal/tegra/soctherm.c:1928: warning: Function parameter or member 'ts' not described in 'soctherm_throttle_program'
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
> ---
>  drivers/thermal/tegra/soctherm.c | 15 +++++++++++++--
>  1 file changed, 13 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/thermal/tegra/soctherm.c b/drivers/thermal/tegra/soctherm.c
> index 5acaad3a594f3..66e0639da4bf2 100644
> --- a/drivers/thermal/tegra/soctherm.c
> +++ b/drivers/thermal/tegra/soctherm.c
> @@ -360,7 +360,7 @@ static struct soctherm_oc_irq_chip_data soc_irq_cdata;
>  /**
>   * ccroc_writel() - writes a value to a CCROC register
>   * @ts: pointer to a struct tegra_soctherm
> - * @v: the value to write
> + * @value: the value to write
>   * @reg: the register offset
>   *
>   * Writes @v to @reg.  No return value.
> @@ -435,6 +435,7 @@ static int tegra_thermctl_get_temp(void *data, int *out_temp)
>  
>  /**
>   * enforce_temp_range() - check and enforce temperature range [min, max]
> + * @dev: struct device * of the SOC_THERM instance
>   * @trip_temp: the trip temperature to check
>   *
>   * Checks and enforces the permitted temperature range that SOC_THERM
> @@ -747,6 +748,8 @@ static int get_hot_temp(struct thermal_zone_device *tz, int *trip, int *temp)
>  /**
>   * tegra_soctherm_set_hwtrips() - set HW trip point from DT data
>   * @dev: struct device * of the SOC_THERM instance
> + * @sg: pointer to the sensor group to set the thermtrip temperature for
> + * @tz: struct thermal_zone_device *
>   *
>   * Configure the SOC_THERM HW trip points, setting "THERMTRIP"
>   * "THROTTLE" trip points , using "thermtrips", "critical" or "hot"
> @@ -931,6 +934,7 @@ static irqreturn_t soctherm_thermal_isr_thread(int irq, void *dev_id)
>  
>  /**
>   * soctherm_oc_intr_enable() - Enables the soctherm over-current interrupt
> + * @ts:		pointer to a struct tegra_soctherm
>   * @alarm:		The soctherm throttle id
>   * @enable:		Flag indicating enable the soctherm over-current
>   *			interrupt or disable it
> @@ -1156,7 +1160,7 @@ static void soctherm_oc_irq_enable(struct irq_data *data)
>  
>  /**
>   * soctherm_oc_irq_disable() - Disables overcurrent interrupt requests
> - * @irq_data:	The interrupt request information
> + * @data:	The interrupt request information
>   *
>   * Clears the interrupt request enable bit of the overcurrent
>   * interrupt request chip data.
> @@ -1206,6 +1210,7 @@ static int soctherm_oc_irq_map(struct irq_domain *h, unsigned int virq,
>  /**
>   * soctherm_irq_domain_xlate_twocell() - xlate for soctherm interrupts
>   * @d:      Interrupt request domain
> + * @ctrlr:      Controller device tree node
>   * @intspec:    Array of u32s from DTs "interrupt" property
>   * @intsize:    Number of values inside the intspec array
>   * @out_hwirq:  HW IRQ value associated with this interrupt
> @@ -1681,6 +1686,7 @@ static int soctherm_throt_cfg_parse(struct device *dev,
>  /**
>   * soctherm_init_hw_throt_cdev() - Parse the HW throttle configurations
>   * and register them as cooling devices.
> + * @pdev: Pointer to platform_device struct
>   */
>  static void soctherm_init_hw_throt_cdev(struct platform_device *pdev)
>  {
> @@ -1751,6 +1757,7 @@ static void soctherm_init_hw_throt_cdev(struct platform_device *pdev)
>  
>  /**
>   * throttlectl_cpu_level_cfg() - programs CCROC NV_THERM level config
> + * @ts: pointer to a struct tegra_soctherm
>   * @level: describing the level LOW/MED/HIGH of throttling
>   *
>   * It's necessary to set up the CPU-local CCROC NV_THERM instance with
> @@ -1798,6 +1805,7 @@ static void throttlectl_cpu_level_cfg(struct tegra_soctherm *ts, int level)
>  
>  /**
>   * throttlectl_cpu_level_select() - program CPU pulse skipper config
> + * @ts: pointer to a struct tegra_soctherm
>   * @throt: the LIGHT/HEAVY of throttle event id
>   *
>   * Pulse skippers are used to throttle clock frequencies.  This
> @@ -1841,6 +1849,7 @@ static void throttlectl_cpu_level_select(struct tegra_soctherm *ts,
>  
>  /**
>   * throttlectl_cpu_mn() - program CPU pulse skipper configuration
> + * @ts: pointer to a struct tegra_soctherm
>   * @throt: the LIGHT/HEAVY of throttle event id
>   *
>   * Pulse skippers are used to throttle clock frequencies.  This
> @@ -1874,6 +1883,7 @@ static void throttlectl_cpu_mn(struct tegra_soctherm *ts,
>  
>  /**
>   * throttlectl_gpu_level_select() - selects throttling level for GPU
> + * @ts: pointer to a struct tegra_soctherm
>   * @throt: the LIGHT/HEAVY of throttle event id
>   *
>   * This function programs soctherm's interface to GK20a NV_THERM to select
> @@ -1918,6 +1928,7 @@ static int soctherm_oc_cfg_program(struct tegra_soctherm *ts,
>  
>  /**
>   * soctherm_throttle_program() - programs pulse skippers' configuration
> + * @ts: pointer to a struct tegra_soctherm
>   * @throt: the LIGHT/HEAVY of the throttle event id.
>   *
>   * Pulse skippers are used to throttle clock frequencies.

Reviewed-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>

-- 
viresh



[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux