The patch spi: implement SW control for CS times has been applied to the spi tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-5.5 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 25093bdeb6bcae728e12e3795261dbd3677060a9 Mon Sep 17 00:00:00 2001 From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx> Date: Thu, 26 Sep 2019 13:51:43 +0300 Subject: [PATCH] spi: implement SW control for CS times This change implements CS control for setup, hold & inactive delays. The `cs_setup` delay is completely new, and can help with cases where asserting the CS, also brings the device out of power-sleep, where there needs to be a longer (than usual), before transferring data. The `cs_hold` time can overlap with the `delay` (or `delay_usecs`) from an SPI transfer. The main difference is that `cs_hold` implies that CS will be de-asserted. The `cs_inactive` delay does not have a clear use-case yet. It has been implemented mostly because the `spi_set_cs_timing()` function implements it. To some degree, this could overlap or replace `cs_change_delay`, but this will require more consideration/investigation in the future. All these delays have been added to the `spi_controller` struct, as they would typically be configured by calling `spi_set_cs_timing()` after an `spi_setup()` call. Software-mode for CS control, implies that the `set_cs_timing()` hook has not been provided for the `spi_controller` object. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx> Link: https://lore.kernel.org/r/20190926105147.7839-16-alexandru.ardelean@xxxxxxxxxx Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> --- drivers/spi/spi.c | 45 ++++++++++++++++++++++++++++++++++++++++- include/linux/spi/spi.h | 5 +++++ 2 files changed, 49 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 6beeb363515c..21628b0728f1 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -775,6 +775,15 @@ int spi_register_board_info(struct spi_board_info const *info, unsigned n) static void spi_set_cs(struct spi_device *spi, bool enable) { + bool enable1 = enable; + + if (!spi->controller->set_cs_timing) { + if (enable1) + spi_delay_exec(&spi->controller->cs_setup, NULL); + else + spi_delay_exec(&spi->controller->cs_hold, NULL); + } + if (spi->mode & SPI_CS_HIGH) enable = !enable; @@ -800,6 +809,11 @@ static void spi_set_cs(struct spi_device *spi, bool enable) } else if (spi->controller->set_cs) { spi->controller->set_cs(spi, !enable); } + + if (!spi->controller->set_cs_timing) { + if (!enable1) + spi_delay_exec(&spi->controller->cs_inactive, NULL); + } } #ifdef CONFIG_HAS_DMA @@ -3278,10 +3292,39 @@ EXPORT_SYMBOL_GPL(spi_setup); int spi_set_cs_timing(struct spi_device *spi, struct spi_delay *setup, struct spi_delay *hold, struct spi_delay *inactive) { + size_t len; + if (spi->controller->set_cs_timing) return spi->controller->set_cs_timing(spi, setup, hold, inactive); - return -ENOTSUPP; + + if ((setup && setup->unit == SPI_DELAY_UNIT_SCK) || + (hold && hold->unit == SPI_DELAY_UNIT_SCK) || + (inactive && inactive->unit == SPI_DELAY_UNIT_SCK)) { + dev_err(&spi->dev, + "Clock-cycle delays for CS not supported in SW mode\n"); + return -ENOTSUPP; + } + + len = sizeof(struct spi_delay); + + /* copy delays to controller */ + if (setup) + memcpy(&spi->controller->cs_setup, setup, len); + else + memset(&spi->controller->cs_setup, 0, len); + + if (hold) + memcpy(&spi->controller->cs_hold, hold, len); + else + memset(&spi->controller->cs_hold, 0, len); + + if (inactive) + memcpy(&spi->controller->cs_inactive, inactive, len); + else + memset(&spi->controller->cs_inactive, 0, len); + + return 0; } EXPORT_SYMBOL_GPL(spi_set_cs_timing); diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index f9b4ba2db08d..cfd87b18f077 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -609,6 +609,11 @@ struct spi_controller { /* Optimized handlers for SPI memory-like operations. */ const struct spi_controller_mem_ops *mem_ops; + /* CS delays */ + struct spi_delay cs_setup; + struct spi_delay cs_hold; + struct spi_delay cs_inactive; + /* gpio chip select */ int *cs_gpios; struct gpio_desc **cs_gpiods; -- 2.20.1
