On 10/4/19 8:23 PM, Greg KH wrote: > On Fri, Oct 04, 2019 at 04:19:34PM +0800, JC Kuo wrote: >> Hi, >> >> This series introduces support for Tegra194 XUSB host and pad >> controller. Tegra194 XUSB host and pad controller are highly >> similar to the controllers found on Tegra186. Therefore, it's >> possible to resue xhci-tegra.c and xusb-tegra186.c for Tegra194. >> >> JC Kuo (7): >> xhci: tegra: Parameterize mailbox register addresses >> usb: host: xhci-tegra: Add Tegra194 XHCI support >> phy: tegra: xusb: Protect Tegra186 soc with config >> phy: tegra: xusb: Add Tegra194 support >> dt-bindings: phy: tegra: Add Tegra194 support >> arm64: tegra: Add XUSB and pad controller on Tegra194 >> arm64: tegra: Enable XUSB host in P2972-0000 board > > What changed from v1? You need to put that somewhere, usually in the > patches themselves, below the --- line. > > Or at the very least, in the cover letter. > > Given that I can't find it anywhere here, I'll expect a v3 with that > information to be sent soon :( > For the first two patches, v2 is identical to v1, sorry that I didn't describe in patches. For the patches 3 to 7, the individual patch has "Changes in v2:" session to describe. I will submit v3 with patch 1 and 2 updated. Thanks for the guidance, JC
