Enable SMMU translations for SDHCI and EQOS transactions on T194. Signed-off-by: Krishna Reddy <vdumpa@xxxxxxxxxx> --- arch/arm64/boot/dts/nvidia/tegra194.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index 5ae3bbf..cac3462 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -51,6 +51,7 @@ clock-names = "master_bus", "slave_bus", "rx", "tx", "ptp_ref"; resets = <&bpmp TEGRA194_RESET_EQOS>; reset-names = "eqos"; + iommus = <&smmu TEGRA186_SID_EQOS>; status = "disabled"; snps,write-requests = <1>; @@ -381,6 +382,7 @@ clock-names = "sdhci"; resets = <&bpmp TEGRA194_RESET_SDMMC1>; reset-names = "sdhci"; + iommus = <&smmu TEGRA186_SID_SDMMC1>; nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>; nvidia,pad-autocal-pull-down-offset-3v3-timeout = @@ -403,6 +405,7 @@ clock-names = "sdhci"; resets = <&bpmp TEGRA194_RESET_SDMMC3>; reset-names = "sdhci"; + iommus = <&smmu TEGRA186_SID_SDMMC3>; nvidia,pad-autocal-pull-up-offset-1v8 = <0x00>; nvidia,pad-autocal-pull-down-offset-1v8 = <0x7a>; nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>; @@ -430,6 +433,7 @@ <&bpmp TEGRA194_CLK_PLLC4>; resets = <&bpmp TEGRA194_RESET_SDMMC4>; reset-names = "sdhci"; + iommus = <&smmu TEGRA186_SID_SDMMC4>; nvidia,pad-autocal-pull-up-offset-hs400 = <0x00>; nvidia,pad-autocal-pull-down-offset-hs400 = <0x00>; nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x0a>; -- 2.1.4
