01.08.2019 13:18, Dmitry Osipenko пишет:
> 01.08.2019 0:10, Sowjanya Komatineni пишет:
>> This patch implements DFLL suspend and resume operation.
>>
>> During system suspend entry, CPU clock will switch CPU to safe
>> clock source of PLLP and disables DFLL clock output.
>>
>> DFLL driver suspend confirms DFLL disable state and errors out on
>> being active.
>>
>> DFLL is re-initialized during the DFLL driver resume as it goes
>> through complete reset during suspend entry.
>>
>> Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
>> ---
>> drivers/clk/tegra/clk-dfll.c | 56 ++++++++++++++++++++++++++++++
>> drivers/clk/tegra/clk-dfll.h | 2 ++
>> drivers/clk/tegra/clk-tegra124-dfll-fcpu.c | 1 +
>> 3 files changed, 59 insertions(+)
>>
>> diff --git a/drivers/clk/tegra/clk-dfll.c b/drivers/clk/tegra/clk-dfll.c
>> index f8688c2ddf1a..9900097ec2aa 100644
>> --- a/drivers/clk/tegra/clk-dfll.c
>> +++ b/drivers/clk/tegra/clk-dfll.c
>> @@ -1513,6 +1513,62 @@ static int dfll_init(struct tegra_dfll *td)
>> return ret;
>> }
>>
>> +/**
>> + * tegra_dfll_suspend - check DFLL is disabled
>> + * @dev: DFLL device *
>> + *
>> + * DFLL clock should be disabled by the CPUFreq driver. So, make
>> + * sure it is disabled and disable all clocks needed by the DFLL.
>> + */
>> +int tegra_dfll_suspend(struct device *dev)
>> +{
>> + struct tegra_dfll *td = dev_get_drvdata(dev);
>> +
>> + if (dfll_is_running(td)) {
>> + dev_err(td->dev, "dfll is enabled while shouldn't be\n");
>> + return -EBUSY;
>> + }
>> +
>> + reset_control_assert(td->dvco_rst);
>> +
>> + return 0;
>> +}
>> +EXPORT_SYMBOL(tegra_dfll_suspend);
>> +
>> +/**
>> + * tegra_dfll_resume - reinitialize DFLL on resume
>> + * @dev: DFLL instance
>> + *
>> + * DFLL is disabled and reset during suspend and resume.
>> + * So, reinitialize the DFLL IP block back for use.
>> + * DFLL clock is enabled later in closed loop mode by CPUFreq
>> + * driver before switching its clock source to DFLL output.
>> + */
>> +int tegra_dfll_resume(struct device *dev)
>> +{
>> + struct tegra_dfll *td = dev_get_drvdata(dev);
>> +
>> + reset_control_deassert(td->dvco_rst);
>> +
>> + pm_runtime_irq_safe(td->dev);
>
> Please see my previous reply.
>
Also, you should always bump version of the patches no matter what.
otherwise it turns out very confusing.
