Hello,
This series introduces driver for the External Memory Controller (EMC)
found on Tegra30 chips, it controls the external DRAM on the board. The
purpose of this driver is to program memory timing for external memory on
the EMC clock rate change. The driver was tested using the ACTMON devfreq
driver that performs memory frequency scaling based on memory-usage load.
Changelog:
v8: - Added two new patches:
memory: tegra20-emc: Increase handshake timeout
memory: tegra20-emc: wait_for_completion_timeout() doesn't return error
Turned out that memory-clk handshake may take much more time under
some circumstances. The second patch is a minor cleanup. The same
changes are also applied to the Terga30 EMC driver addition-patch.
The pattern-properties of YAML bindings gained "type: object", for
consistency.
v7: - Addressed review comments that were made by Rob Herring to v6 by
removing old Terga30 Memory Controller binding once it's converted
to YAML, by using explicit patterns for the sub-nodes and specifying
min/max clock rates in the YAML.
- Two patches that were added in v6 are removed from the series:
clk: tegra20: emc: Add tegra20_clk_emc_on_pllp()
ARM: tegra30: cpuidle: Don't enter LP2 on CPU0 when EMC runs off PLLP
Because the problem with the PLLP is resolved now, turned out it was
a bug in the CPU-suspend code.
- The "Introduce Tegra30 EMC driver" patch got a fix for the "Same Freq"
bit typo, it's a bit 27 and not 16.
v6: - Tegra124 Memory Controller binding factored out into standalone
binding because it requires to specify MC_EMEM_ARB_MISC1 for EMEM
programming, which is not required for Tegra30. This makes the
upstream MC registers specification to match downstream exactly,
easing porting of boards memory timings configuration to upstream.
- Tegra30/124 Memory Controller binding converted to YAML.
- Tegra30 External Memory Controller binding now is in YAML format.
- Added workaround for hanging during LP2 when EMC runs off PLLP on
Tegra30 in this new patches:
clk: tegra20: emc: Add tegra20_clk_emc_on_pllp()
ARM: tegra30: cpuidle: Don't enter LP2 on CPU0 when EMC runs off PLLP
- Added info message to the Tegra20/30 EMC drivers, telling about
RAM code and a number of available timings:
memory: tegra20-emc: Print a brief info message about the timings
v5: - Addressed review comments that were made by Thierry Reding to v4 by
adding appropriate copyrights to the source code headers and making
Tegra30 EMC driver to use common Tegra20 CLK API directly instead
of having a dummy-proxy functions specifically for Tegra30.
- Addressed review comments that were made by Stephen Boyd to v4 by
rewording commit message of the "Add custom EMC clock implementation"
patch and adding clarifying comment (to that patch as well) which
tells why EMC is a critical clock.
- Added suspend-resume to Tegra30 EMC driver to error out if EMC driver
is in a "bad state" as it will likely cause a hang on entering suspend.
- Dropped patch "tegra20-emc: Replace clk_get_sys with devm_clk_get"
because the replaced clocks are actually should be removed altogether
in the "Drop setting EMC rate to max on probe" patch and that was
missed by an accident.
- Added "tegra20-emc: Pre-configure debug register" patch which ensures
that inappropriate HW debug features are disabled at a probe time.
The same change is also made in the "Introduce Tegra30 EMC driver"
patch.
- Added ACKs to the patches from Peter De Schrijver that he gave to v4
since all of the v5 changes are actually very minor.
v4: - Addressed review comments that were made by Peter De Schrijver to v3
by adding fence_udelay() after writes in the "Add custom EMC clock
implementation" patch.
- Added two new minor patches:
memory: tegra: Ensure timing control debug features are disabled
memory: tegra: Consolidate registers definition into one place
The first one is needed to ensure that EMC driver will work
properly regardless of hardware configuration left after boot.
The second patch is just a minor code cleanup.
- The "Introduce Tegra30 EMC driver" got also few very minor changes.
Now every possible error case is handled, nothing is ignored.
The EMC_DBG register is explicitly initialized during probe to be
on the safe side.
v3: - Addressed review comments that were made by Stephen Boyd to v2 by
adding explicit typing for the callback variable, by including
"clk-provider.h" directly in the code and by dropping __clk_lookup
usage where possible.
- Added more patches into this series:
memory: tegra20-emc: Drop setting EMC rate to max on probe
memory: tegra20-emc: Adapt for clock driver changes
memory: tegra20-emc: Include io.h instead of iopoll.h
memory: tegra20-emc: Replace clk_get_sys with devm_clk_get
Initially I was going to include these patches into other patchset,
but changed my mind after rearranging things a tad. The "Adapt for
clock driver changes" patch is directly related to the clock changes
done in the first patch of this series, the rest are minor cleanups
that are fine to include here as well.
- Added some more words to the commit message of "Add binding for NVIDIA
Tegra30 External Memory Controller" patch, clarifying why common DDR
timing device-tree form isn't suitable for Tegra30.
- The Tegra30 EMC driver now explicitly selects the registers access
mode (EMC_DBG mux), not relying on the setting left from bootloader.
v2: - Added support for changing MC clock diver configuration based on
Memory Controller (MC) configuration which is part of the memory
timing.
- Merged the "Add custom EMC clock implementation" patch into this
series because the "Introduce Tegra30 EMC driver" patch directly
depends on it. Please note that Tegra20 EMC driver will need to be
adapted for the clock changes as well, I'll send out the Tegra20
patches after this series will be applied because of some other
dependencies (devfreq) and because the temporary breakage won't
be critical (driver will just error out on probe).
- EMC driver now performs MC configuration validation by checking
that the number of MC / EMC timings matches and that the timings
rate is the same.
- EMC driver now supports timings that want to change the MC clock
configuration.
- Other minor prettifying changes of the code.
Dmitry Osipenko (15):
clk: tegra20/30: Add custom EMC clock implementation
memory: tegra20-emc: Drop setting EMC rate to max on probe
memory: tegra20-emc: Adapt for clock driver changes
memory: tegra20-emc: Include io.h instead of iopoll.h
memory: tegra20-emc: Pre-configure debug register
memory: tegra20-emc: Print a brief info message about the timings
memory: tegra20-emc: Increase handshake timeout
memory: tegra20-emc: wait_for_completion_timeout() doesn't return
error
dt-bindings: memory: tegra30: Convert to Tegra124 YAML
dt-bindings: memory: Add binding for NVIDIA Tegra30 Memory Controller
dt-bindings: memory: Add binding for NVIDIA Tegra30 External Memory
Controller
memory: tegra: Introduce Tegra30 EMC driver
memory: tegra: Ensure timing control debug features are disabled
memory: tegra: Consolidate registers definition into common header
ARM: dts: tegra30: Add External Memory Controller node
.../nvidia,tegra124-mc.yaml | 156 +++
.../nvidia,tegra30-emc.yaml | 341 +++++
.../memory-controllers/nvidia,tegra30-mc.txt | 123 --
.../memory-controllers/nvidia,tegra30-mc.yaml | 173 +++
arch/arm/boot/dts/tegra30.dtsi | 9 +
drivers/clk/tegra/Makefile | 2 +
drivers/clk/tegra/clk-tegra20-emc.c | 293 ++++
drivers/clk/tegra/clk-tegra20.c | 55 +-
drivers/clk/tegra/clk-tegra30.c | 38 +-
drivers/clk/tegra/clk.h | 3 +
drivers/memory/tegra/Kconfig | 10 +
drivers/memory/tegra/Makefile | 1 +
drivers/memory/tegra/mc.c | 42 +-
drivers/memory/tegra/mc.h | 74 +-
drivers/memory/tegra/tegra124.c | 20 -
drivers/memory/tegra/tegra20-emc.c | 134 +-
drivers/memory/tegra/tegra30-emc.c | 1230 +++++++++++++++++
drivers/memory/tegra/tegra30.c | 23 +
include/linux/clk/tegra.h | 11 +
include/soc/tegra/mc.h | 2 +-
20 files changed, 2427 insertions(+), 313 deletions(-)
create mode 100644 Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml
create mode 100644 Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml
delete mode 100644 Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.txt
create mode 100644 Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml
create mode 100644 drivers/clk/tegra/clk-tegra20-emc.c
create mode 100644 drivers/memory/tegra/tegra30-emc.c
--
2.22.0
