This patch configures polarity of the core power request signal in PMC control register based on the device tree property. PMC asserts and de-asserts power request signal based on it polarity when it need to power-up and power-down the core rail during SC7. Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx> --- drivers/soc/tegra/pmc.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c index 603fc3bd73f5..c9eea5ef008a 100644 --- a/drivers/soc/tegra/pmc.c +++ b/drivers/soc/tegra/pmc.c @@ -56,6 +56,7 @@ #define PMC_CNTRL_SIDE_EFFECT_LP0 BIT(14) /* LP0 when CPU pwr gated */ #define PMC_CNTRL_SYSCLK_OE BIT(11) /* system clock enable */ #define PMC_CNTRL_SYSCLK_POLARITY BIT(10) /* sys clk polarity */ +#define PMC_CNTRL_PWRREQ_POLARITY BIT(8) #define PMC_CNTRL_MAIN_RST BIT(4) #define PMC_CNTRL_LATCH_WAKEUPS BIT(5) @@ -2304,6 +2305,11 @@ static void tegra20_pmc_init(struct tegra_pmc *pmc) else value |= PMC_CNTRL_SYSCLK_POLARITY; + if (pmc->corereq_high) + value &= ~PMC_CNTRL_PWRREQ_POLARITY; + else + value |= PMC_CNTRL_PWRREQ_POLARITY; + /* configure the output polarity while the request is tristated */ tegra_pmc_writel(pmc, value, PMC_CNTRL); -- 2.7.4
