Re: [PATCH V6 04/27] PCI: tegra: Mask AFI_INTR in runtime suspend

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 20-Jun-19 7:57 PM, Lorenzo Pieralisi wrote:
> On Tue, Jun 18, 2019 at 11:31:43PM +0530, Manikanta Maddireddy wrote:
>> AFI_INTR is unmasked in tegra_pcie_enable_controller(), mask it to avoid
>> unwanted interrupts raised by AFI after pex_rst is asserted.
>>
>> Following sequence triggers such scenario,
>>  - tegra_pcie_remove() triggers runtime suspend
>>  - pex_rst is asserted in runtime suspend
>>  - PRSNT_MAP bit field in RP_PRIV_MISC register changes from EP_PRSNT to
>>    EP_ABSNT
>>  - This is sensed by AFI and triggers "Slot present pin change" interrupt
>>  - tegra_pcie_isr() function accesses AFI register when runtime suspend
>>    is going through power off sequence
>>
>> rmmod pci-tegra
>>  pci_generic_config_write32: 108 callbacks suppressed
>>  pci_bus 0002:00: 2-byte config write to 0002:00:02.0 offset 0x4c may corrupt adjacent RW1C bits
>>  pci_bus 0002:00: 2-byte config write to 0002:00:02.0 offset 0x9c may corrupt adjacent RW1C bits
>>  pci_bus 0002:00: 2-byte config write to 0002:00:02.0 offset 0x88 may corrupt adjacent RW1C bits
>>  pci_bus 0002:00: 2-byte config write to 0002:00:02.0 offset 0x90 may corrupt adjacent RW1C bits
>>  pci_bus 0002:00: 2-byte config write to 0002:00:02.0 offset 0x4 may corrupt adjacent RW1C bits
>>  igb 0002:04:00.1: removed PHC on enP2p4s0f1
>>  igb 0002:04:00.0: removed PHC on enP2p4s0f0
>>  pci_bus 0002:00: 2-byte config write to 0002:00:01.0 offset 0x4c may corrupt adjacent RW1C bits
>>  pci_bus 0002:00: 2-byte config write to 0002:00:01.0 offset 0x9c may corrupt adjacent RW1C bits
>>  pci_bus 0002:00: 2-byte config write to 0002:00:01.0 offset 0x88 may corrupt adjacent RW1C bits
>>  pci_bus 0002:00: 2-byte config write to 0002:00:01.0 offset 0x90 may corrupt adjacent RW1C bits
>>  pci_bus 0002:00: 2-byte config write to 0002:00:01.0 offset 0x4 may corrupt adjacent RW1C bits
>>  rcu: INFO: rcu_preempt self-detected stall on CPU
>>  SError Interrupt on CPU0, code 0xbf000002 -- SError
>>  CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W         5.1.0-rc3-next-20190405-00027-gcd8110499e6f-dirty #42
>>  Hardware name: NVIDIA Jetson TX1 Developer Kit (DT)
>>  pstate: 20000085 (nzCv daIf -PAN -UAO)
>>  pc : tegra_pcie_isr+0x58/0x178 [pci_tegra]
>>  lr : tegra_pcie_isr+0x40/0x178 [pci_tegra]
>>  sp : ffff000010003da0
>>  x29: ffff000010003da0 x28: 0000000000000000
>>  x27: ffff8000f9e61000 x26: ffff000010fbf420
>>  x25: ffff000011427f93 x24: ffff8000fa600410
>>  x23: ffff00001129d000 x22: ffff00001129d000
>>  x21: ffff8000f18bf3c0 x20: 0000000000000070
>>  x19: 00000000ffffffff x18: 0000000000000000
>>  x17: 0000000000000000 x16: 0000000000000000
>>  x15: 0000000000000000 x14: ffff000008d40a48
>>  x13: ffff000008d40a30 x12: ffff000008d40a20
>>  x11: ffff000008d40a10 x10: ffff000008d40a00
>>  x9 : ffff000008d409e8 x8 : ffff000008d40ae8
>>  x7 : ffff000008d40ad0 x6 : ffff000010003e58
>>  x5 : ffff8000fac00248 x4 : 0000000000000000
>>  x3 : ffff000008d40b08 x2 : fffffffffffffff8
>>  x1 : ffff000008d3f4e8 x0 : 00000000ffffffff
>>  Kernel panic - not syncing: Asynchronous SError Interrupt
>>  CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W         5.1.0-rc3-next-20190405-00027-gcd8110499e6f-dirty #42
>>  Hardware name: NVIDIA Jetson TX1 Developer Kit (DT)
>>  Call trace:
>>   dump_backtrace+0x0/0x158
>>   show_stack+0x14/0x20
>>   dump_stack+0xa8/0xcc
>>   panic+0x140/0x2f4
>>   nmi_panic+0x6c/0x70
>>   arm64_serror_panic+0x74/0x80
>>   __pte_error+0x0/0x28
>>   el1_error+0x84/0xf8
>>   tegra_pcie_isr+0x58/0x178 [pci_tegra]
>>   __handle_irq_event_percpu+0x70/0x198
>>   handle_irq_event_percpu+0x34/0x88
>>   handle_irq_event+0x48/0x78
>>   handle_fasteoi_irq+0xb4/0x190
>>   generic_handle_irq+0x24/0x38
>>   __handle_domain_irq+0x5c/0xb8
>>   gic_handle_irq+0x58/0xa8
>>   el1_irq+0xb8/0x180
>>   cpuidle_enter_state+0x138/0x358
>>   cpuidle_enter+0x18/0x20
>>   call_cpuidle+0x1c/0x48
>>   do_idle+0x230/0x2d0
>>   cpu_startup_entry+0x20/0x28
>>   rest_init+0xd4/0xe0
>>   arch_call_rest_init+0xc/0x14
>>   start_kernel+0x444/0x470
>>
>> Signed-off-by: Manikanta Maddireddy <mmaddireddy@xxxxxxxxxx>
>> Acked-by: Thierry Reding <treding@xxxxxxxxxx>
>> ---
>> V6: No change
>>
>> V5:
>> * Added blank line before block-style comment
>>
>> V4: No change
>>
>> V3:
>> * Update the commit log and comment to reflect why this fix is required
>> * MSI interrupt is not disabled
>>
>> V2: This is new patch in V2
>>
>>  drivers/pci/controller/pci-tegra.c | 15 +++++++++++++++
>>  1 file changed, 15 insertions(+)
>>
>> diff --git a/drivers/pci/controller/pci-tegra.c b/drivers/pci/controller/pci-tegra.c
>> index bb3c0af9c830..0453bfb2726e 100644
>> --- a/drivers/pci/controller/pci-tegra.c
>> +++ b/drivers/pci/controller/pci-tegra.c
>> @@ -1622,6 +1622,15 @@ static int tegra_pcie_disable_msi(struct tegra_pcie *pcie)
>>  	return 0;
>>  }
>>  
>> +static void tegra_pcie_disable_interrupts(struct tegra_pcie *pcie)
>> +{
>> +	u32 value;
>> +
>> +	value = afi_readl(pcie, AFI_INTR_MASK);
>> +	value &= ~AFI_INTR_MASK_INT_MASK;
>> +	afi_writel(pcie, value, AFI_INTR_MASK);
>> +}
>> +
>>  static int tegra_pcie_get_xbar_config(struct tegra_pcie *pcie, u32 lanes,
>>  				      u32 *xbar)
>>  {
>> @@ -2467,6 +2476,12 @@ static int __maybe_unused tegra_pcie_pm_suspend(struct device *dev)
>>  
>>  	tegra_pcie_disable_ports(pcie);
>>  
>> +	/*
>> +	 * AFI_INTR is unmasked in tegra_pcie_enable_controller(), mask it to
>> +	 * avoid unwanted interrupts raised by AFI after pex_rst is asserted.
>> +	 */
>> +	tegra_pcie_disable_interrupts(pcie);
> When do you re-enable it ? I assume it is enabled by default for
> a reason, so if you disable on suspend you renable it on resume.
>
> Please explain or I will drop this patch from the series.
>
> Lorenzo

Power on reset value of AFI_INTR_MASK_INT_MASK is 0, it is not enabled by default.
In suspend AFI reset is asserted, so in resume AFI programming has to be done
again including AFI_INTR_MASK_INT_MASK. Even if I don't disable here, in resume
it has to be enabled after bringing AFI out of reset.

tegra_pcie_pm_resume() -> tegra_pcie_enable_controller() will enable it.

Manikanta 

>
>> +
>>  	if (pcie->soc->program_uphy) {
>>  		err = tegra_pcie_phy_power_off(pcie);
>>  		if (err < 0)
>> -- 
>> 2.17.1
>>




[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux