Re: [PATCH v2 1/2] arm64: tegra: add ACONNECT, ADMA and AGIC nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/06/2019 09:56, Sameer Pujar wrote:
> Add DT nodes for following devices on Tegra186 and Tegra194
>  * ACONNECT
>  * ADMA
>  * AGIC
> 
> Signed-off-by: Sameer Pujar <spujar@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/nvidia/tegra186.dtsi | 68 ++++++++++++++++++++++++++++++++
>  arch/arm64/boot/dts/nvidia/tegra194.dtsi | 68 ++++++++++++++++++++++++++++++++
>  2 files changed, 136 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
> index 426ac0b..ccd902b 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
> +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
> @@ -1295,4 +1295,72 @@
>  				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
>  		interrupt-parent = <&gic>;
>  	};
> +
> +	aconnect@2a41000 {
> +		compatible = "nvidia,tegra210-aconnect";
> +		clocks = <&bpmp TEGRA186_CLK_APE>,
> +			 <&bpmp TEGRA186_CLK_APB2APE>;
> +		clock-names = "ape", "apb2ape";
> +		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_AUD>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0x02930000 0x0 0x02930000 0x50000
> +			  0x02a41000 0x0 0x02a41000 0x3000>;

We only need one address range here that covers the entire APE.

> +		status = "disabled";
> +
> +		dma-controller@2930000 {
> +			compatible = "nvidia,tegra186-adma";
> +			reg = <0x02930000 0x50000>;
> +			interrupt-parent = <&agic>;
> +			interrupts =  <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
> +				      <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
> +				      <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
> +				      <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> +				      <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> +				      <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
> +				      <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
> +				      <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
> +				      <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> +				      <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
> +				      <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
> +				      <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
> +				      <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
> +				      <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
> +				      <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
> +				      <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
> +				      <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
> +				      <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
> +				      <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
> +				      <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
> +				      <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
> +				      <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
> +				      <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
> +				      <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
> +				      <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
> +				      <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
> +				      <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
> +				      <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
> +				      <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
> +				      <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
> +				      <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
> +				      <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
> +			#dma-cells = <1>;
> +			clocks = <&bpmp TEGRA186_CLK_AHUB>;
> +			clock-names = "d_audio";
> +			status = "disabled";
> +		};
> +
> +		agic: agic@2a41000 {
> +			compatible = "nvidia,tegra210-agic";
> +			#interrupt-cells = <3>;
> +			interrupt-controller;
> +			reg = <0x02a41000 0x1000>,
> +			      <0x02a41000 0x2000>;

These addresses should not overlap.

Cheers
Jon

-- 
nvpublic



[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux