Re: [PATCH V1 1/6] i2c: tegra: clean up macros

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



07.06.2019 14:55, Bitan Biswas пишет:
> Clean up macros by:
> 1) removing unused macros
> 2) replace constants by macro BIT()
> 
> Signed-off-by: Bitan Biswas <bbiswas@xxxxxxxxxx>
> ---
>  drivers/i2c/busses/i2c-tegra.c | 17 +++--------------
>  1 file changed, 3 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
> index 1dbba39..00692d8 100644
> --- a/drivers/i2c/busses/i2c-tegra.c
> +++ b/drivers/i2c/busses/i2c-tegra.c
> @@ -54,20 +54,15 @@
>  #define I2C_INT_STATUS				0x068
>  #define I2C_INT_BUS_CLR_DONE			BIT(11)
>  #define I2C_INT_PACKET_XFER_COMPLETE		BIT(7)
> -#define I2C_INT_ALL_PACKETS_XFER_COMPLETE	BIT(6)
> -#define I2C_INT_TX_FIFO_OVERFLOW		BIT(5)
> -#define I2C_INT_RX_FIFO_UNDERFLOW		BIT(4)
>  #define I2C_INT_NO_ACK				BIT(3)
>  #define I2C_INT_ARBITRATION_LOST		BIT(2)
>  #define I2C_INT_TX_FIFO_DATA_REQ		BIT(1)
>  #define I2C_INT_RX_FIFO_DATA_REQ		BIT(0)
>  #define I2C_CLK_DIVISOR				0x06c
>  #define I2C_CLK_DIVISOR_STD_FAST_MODE_SHIFT	16
> -#define I2C_CLK_MULTIPLIER_STD_FAST_MODE	8
>  
>  #define DVC_CTRL_REG1				0x000
>  #define DVC_CTRL_REG1_INTR_EN			BIT(10)
> -#define DVC_CTRL_REG2				0x004
>  #define DVC_CTRL_REG3				0x008
>  #define DVC_CTRL_REG3_SW_PROG			BIT(26)
>  #define DVC_CTRL_REG3_I2C_DONE_INTR_EN		BIT(30)
> @@ -75,24 +70,21 @@
>  #define DVC_STATUS_I2C_DONE_INTR		BIT(30)
>  
>  #define I2C_ERR_NONE				0x00
> -#define I2C_ERR_NO_ACK				0x01
> -#define I2C_ERR_ARBITRATION_LOST		0x02
> -#define I2C_ERR_UNKNOWN_INTERRUPT		0x04
> +#define I2C_ERR_NO_ACK				BIT(0)
> +#define I2C_ERR_ARBITRATION_LOST		BIT(1)
> +#define I2C_ERR_UNKNOWN_INTERRUPT		BIT(2)
>  
>  #define PACKET_HEADER0_HEADER_SIZE_SHIFT	28
>  #define PACKET_HEADER0_PACKET_ID_SHIFT		16
>  #define PACKET_HEADER0_CONT_ID_SHIFT		12
>  #define PACKET_HEADER0_PROTOCOL_I2C		BIT(4)
>  
> -#define I2C_HEADER_HIGHSPEED_MODE		BIT(22)
>  #define I2C_HEADER_CONT_ON_NAK			BIT(21)
> -#define I2C_HEADER_SEND_START_BYTE		BIT(20)
>  #define I2C_HEADER_READ				BIT(19)
>  #define I2C_HEADER_10BIT_ADDR			BIT(18)
>  #define I2C_HEADER_IE_ENABLE			BIT(17)
>  #define I2C_HEADER_REPEAT_START			BIT(16)
>  #define I2C_HEADER_CONTINUE_XFER		BIT(15)
> -#define I2C_HEADER_MASTER_ADDR_SHIFT		12
>  #define I2C_HEADER_SLAVE_ADDR_SHIFT		1
>  
>  #define I2C_BUS_CLEAR_CNFG			0x084
> @@ -106,8 +98,6 @@
>  
>  #define I2C_CONFIG_LOAD				0x08C
>  #define I2C_MSTR_CONFIG_LOAD			BIT(0)
> -#define I2C_SLV_CONFIG_LOAD			BIT(1)
> -#define I2C_TIMEOUT_CONFIG_LOAD			BIT(2)
>  
>  #define I2C_CLKEN_OVERRIDE			0x090
>  #define I2C_MST_CORE_CLKEN_OVR			BIT(0)
> @@ -133,7 +123,6 @@
>  #define I2C_STANDARD_MODE			100000
>  #define I2C_FAST_MODE				400000
>  #define I2C_FAST_PLUS_MODE			1000000
> -#define I2C_HS_MODE				3500000
>  
>  /* Packet header size in bytes */
>  #define I2C_PACKET_HEADER_SIZE			12
> 

Looks good!

Reviewed-by: Dmitry Osipenko <digetx@xxxxxxxxx>



[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux