06.06.2019 19:53, Jon Hunter пишет: > > On 06/06/2019 17:44, Dmitry Osipenko wrote: >> 06.06.2019 19:32, Jon Hunter пишет: >>> >>> On 06/06/2019 16:18, Dmitry Osipenko wrote: >>> >>> ... >>> >>>>>> If I understood everything correctly, the FIFO buffer is shared among >>>>>> all of the ADMA clients and hence it should be up to the ADMA driver to >>>>>> manage the quotas of the clients. So if there is only one client that >>>>>> uses ADMA at a time, then this client will get a whole FIFO buffer, but >>>>>> once another client starts to use ADMA, then the ADMA driver will have >>>>>> to reconfigure hardware to split the quotas. >>>>> >>>>> The FIFO quotas are managed by the ADMAIF driver (does not exist in >>>>> mainline currently but we are working to upstream this) because it is >>>>> this device that owns and needs to configure the FIFOs. So it is really >>>>> a means to pass the information from the ADMAIF to the ADMA. >>>> >>>> So you'd want to reserve a larger FIFO for an audio channel that has a >>>> higher audio rate since it will perform reads more often. You could also >>>> prioritize one channel over the others, like in a case of audio call for >>>> example. >>>> >>>> Is the shared buffer smaller than may be needed by clients in a worst >>>> case scenario? If you could split the quotas statically such that each >>>> client won't ever starve, then seems there is no much need in the >>>> dynamic configuration. >>> >>> Actually, this is still very much relevant for the static case. Even if >>> we defined a static configuration of the FIFO mapping in the ADMAIF >>> driver we still need to pass this information to the ADMA. I don't >>> really like the idea of having it statically defined in two different >>> drivers. >> >> Ah, so you need to apply the same configuration in two places. Correct? >> >> Are ADMAIF and ADMA really two different hardware blocks? Or you >> artificially decoupled the ADMA driver? > > These are two different hardware modules with their own register sets. > Yes otherwise, it would be a lot simpler! The register sets are indeed separated, but it looks like that ADMAIF is really a part of ADMA that is facing to Audio Crossbar. No? What is the purpose of ADMAIF? Maybe you could amend the ADMA hardware description with the ADMAIF addition until it's too late.
