RE: [PATCH V5 03/16] PCI: Export pcie_bus_config symbol

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





-----Original Message-----
From: linux-pci-owner@xxxxxxxxxxxxxxx <linux-pci-owner@xxxxxxxxxxxxxxx> On
Behalf Of Thierry Reding
Sent: Friday, May 3, 2019 4:38 PM
To: Vidya Sagar <vidyas@xxxxxxxxxx>
Cc: lorenzo.pieralisi@xxxxxxx; bhelgaas@xxxxxxxxxx; robh+dt@xxxxxxxxxx;
mark.rutland@xxxxxxx; Jonathan Hunter <jonathanh@xxxxxxxxxx>;
kishon@xxxxxx; catalin.marinas@xxxxxxx; will.deacon@xxxxxxx;
jingoohan1@xxxxxxxxx; gustavo.pimentel@xxxxxxxxxxxx; Mikko Perttunen
<mperttunen@xxxxxxxxxx>; linux-pci@xxxxxxxxxxxxxxx;
devicetree@xxxxxxxxxxxxxxx; linux-tegra@xxxxxxxxxxxxxxx; linux-
kernel@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; Krishna Thota
<kthota@xxxxxxxxxx>; Manikanta Maddireddy <mmaddireddy@xxxxxxxxxx>;
sagar.tv@xxxxxxxxx
Subject: Re: [PATCH V5 03/16] PCI: Export pcie_bus_config symbol

On Wed, Apr 24, 2019 at 10:49:51AM +0530, Vidya Sagar wrote:
> Export pcie_bus_config to enable host controller drivers setting it to
> a specific configuration be able to build as loadable modules
>
> Signed-off-by: Vidya Sagar <vidyas@xxxxxxxxxx>
> ---
> Changes since [v4]:
> * None
>
> Changes since [v3]:
> * None
>
> Changes since [v2]:
> * None
>
> Changes since [v1]:
> * This is a new patch in v2 series
>
>  drivers/pci/pci.c | 1 +
>  1 file changed, 1 insertion(+)

It doesn't look to me like this is something that host controller drivers are
supposed to change. This is set via the pci kernel command- line parameter,
meaning it's a way of tuning the system configuration.
Drivers should not be allowed to override this after the fact.

Why do we need to set this?
Here is the reason I'm doing it.
First things first, Tegra194 supports MPS up to 256 bytes.
Assume there are two endpoints with MPS supported up to
a) 128 bytes (Ex:- Realtek NIC with 8168 controller)
b) 256 bytes (Ex:- Kingston NVMe drive)
Now, leaving "pcie_bus_config" untouched in the driver sets it to
PCIE_BUS_DEFAULT by default. With this setting, for both (a) and (b),
MPS is set to 128, which means, even though Tegra194 supports 256 MPS, it is not
set to 256 even in case of (b) thereby not using RP's 256 MPS feature.
If I explicitly set pcie_bus_config=PCIE_BUS_PERFORMACE in the code, then 256 MPS is set when
(b) is connected, but when (a) is connected, for root port MPS 256 is set and for
endpoint MPS 128 is set, because of which root port tries to send packets with 256
payload that breaks functionality of Realtek NIC card.
The best option I've found out is that when I set 256 in PCI_EXP_DEVCTL of root port
explicitly before link up and use pcie_bus_config=PCIE_BUS_SAFE, then, I get the best of both
PCIE_BUS_DEFAULT and PCIE_BUS_PERFORMANCE i.e. with (a) connected, MPS is set to 128 in both RP
and EP and with (b) connected, MPS is set to 256 in both RP and EP.

So, is it like, pcie_bus_config shouldn't be set to anything explicitly in the driver and depending on the
platform and what is connected to root port, kernel parameter can be passed with appropriate setting?


Thierry

> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index
> f5ff01dc4b13..731f78508601 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -94,6 +94,7 @@ unsigned long pci_hotplug_mem_size =
> DEFAULT_HOTPLUG_MEM_SIZE;  unsigned long pci_hotplug_bus_size =
> DEFAULT_HOTPLUG_BUS_SIZE;
>
>  enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_DEFAULT;
> +EXPORT_SYMBOL_GPL(pcie_bus_config);
>
>  /*
>   * The default CLS is used if arch didn't set CLS explicitly and not
> --
> 2.17.1
>



[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux