On Wed, Apr 24, 2019 at 10:49:58AM +0530, Vidya Sagar wrote: > Add support for Tegra194 PCIe controllers. These controllers are based > on Synopsys DesignWare core IP. > > Signed-off-by: Vidya Sagar <vidyas@xxxxxxxxxx> > --- > Changes since [v4]: > * None > > Changes since [v3]: > * None > > Changes since [v2]: > * Using only 'Cx' (x-being controller number) format to represent a controller > * Changed to 'value: description' format where applicable > * Changed 'nvidia,init-speed' to 'nvidia,init-link-speed' > * Provided more documentation for 'nvidia,init-link-speed' property > * Changed 'nvidia,pex-wake' to 'nvidia,wake-gpios' > > Changes since [v1]: > * Added documentation for 'power-domains' property > * Removed 'window1' and 'window2' properties > * Removed '_clk' and '_rst' from clock and reset names > * Dropped 'pcie' from phy-names > * Added entry for BPMP-FW handle > * Removed offsets for some of the registers and added them in code and would be pickedup based on > controller ID > * Changed 'nvidia,max-speed' to 'max-link-speed' and is made as an optional > * Changed 'nvidia,disable-clock-request' to 'supports-clkreq' with inverted operation > * Added more documentation for 'nvidia,update-fc-fixup' property > * Removed 'nvidia,enable-power-down' and 'nvidia,plat-gpios' properties > * Added '-us' to all properties that represent time in microseconds > * Moved P2U documentation to a separate file > > .../bindings/pci/nvidia,tegra194-pcie.txt | 187 ++++++++++++++++++ > 1 file changed, 187 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt > > diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt > new file mode 100644 > index 000000000000..208dff126108 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt > @@ -0,0 +1,187 @@ > +NVIDIA Tegra PCIe controller (Synopsys DesignWare Core based) > + > +This PCIe host controller is based on the Synopsis Designware PCIe IP > +and thus inherits all the common properties defined in designware-pcie.txt. > + > +Required properties: > +- compatible: For Tegra19x, must contain "nvidia,tegra194-pcie". > +- device_type: Must be "pci" > +- power-domains: A phandle to the node that controls power to the respective > + PCIe controller and a specifier name for the PCIe controller. Following are > + the specifiers for the different PCIe controllers > + TEGRA194_POWER_DOMAIN_PCIEX8B: C0 > + TEGRA194_POWER_DOMAIN_PCIEX1A: C1 > + TEGRA194_POWER_DOMAIN_PCIEX1A: C2 > + TEGRA194_POWER_DOMAIN_PCIEX1A: C3 > + TEGRA194_POWER_DOMAIN_PCIEX4A: C4 > + TEGRA194_POWER_DOMAIN_PCIEX8A: C5 > + these specifiers are defined in > + "include/dt-bindings/power/tegra194-powergate.h" file. > +- reg: A list of physical base address and length for each set of controller Perhaps "list of physical base address and length pairs". > + registers. Must contain an entry for each entry in the reg-names property. > +- reg-names: Must include the following entries: > + "appl": Controller's application logic registers > + "config": As per the definition in designware-pcie.txt > + "atu_dma": iATU and DMA registers. This is where the iATU (internal Address > + Translation Unit) registers of the PCIe core are made available > + fow SW access. s/fow/for/ Thierry
Attachment:
signature.asc
Description: PGP signature
