Remove multiple write enable and disable sequences of dbi registers as Tegra194 implements writes to BAR-0 register (offset: 0x10) controlled by DBI write-lock enable bit thereby not allowing any further writes to BAR-0 register in config space to take place. Hence disabling write permission only towards the end. Signed-off-by: Vidya Sagar <vidyas@xxxxxxxxxx> --- Changes since [v4]: * None Changes since [v3]: * None Changes since [v2]: * None Changes since [v1]: * None drivers/pci/controller/dwc/pcie-designware-host.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c index 36fd3f5b48f6..e5e3571dd2fe 100644 --- a/drivers/pci/controller/dwc/pcie-designware-host.c +++ b/drivers/pci/controller/dwc/pcie-designware-host.c @@ -654,7 +654,6 @@ void dw_pcie_setup_rc(struct pcie_port *pp) val &= 0xffff00ff; val |= 0x00000100; dw_pcie_writel_dbi(pci, PCI_INTERRUPT_LINE, val); - dw_pcie_dbi_ro_wr_dis(pci); /* Setup bus numbers */ val = dw_pcie_readl_dbi(pci, PCI_PRIMARY_BUS); @@ -686,8 +685,6 @@ void dw_pcie_setup_rc(struct pcie_port *pp) dw_pcie_wr_own_conf(pp, PCI_BASE_ADDRESS_0, 4, 0); - /* Enable write permission for the DBI read-only register */ - dw_pcie_dbi_ro_wr_en(pci); /* Program correct class for RC */ dw_pcie_wr_own_conf(pp, PCI_CLASS_DEVICE, 2, PCI_CLASS_BRIDGE_PCI); /* Better disable write permission right after the update */ -- 2.17.1
