On Mon, Apr 15, 2019 at 08:25:48PM +0530, Manikanta Maddireddy wrote:
>
>
> On 15-Apr-19 4:59 PM, Thierry Reding wrote:
> > On Thu, Apr 11, 2019 at 10:33:31PM +0530, Manikanta Maddireddy wrote:
> >> UPHY electrical programming guidelines are documented in Tegra210 TRM.
> >> Program these electrical settings for proper eye diagram in Gen1 and Gen2
> >> link speeds.
> >>
> >> Signed-off-by: Manikanta Maddireddy <mmaddireddy@xxxxxxxxxx>
> >> ---
> >> drivers/pci/controller/pci-tegra.c | 100 +++++++++++++++++++++++++++++
> >> 1 file changed, 100 insertions(+)
> >>
> >> diff --git a/drivers/pci/controller/pci-tegra.c b/drivers/pci/controller/pci-tegra.c
> >> index 9ff1a0e2797f..a377245d254d 100644
> >> --- a/drivers/pci/controller/pci-tegra.c
> >> +++ b/drivers/pci/controller/pci-tegra.c
> >> @@ -177,6 +177,32 @@
> >>
> >> #define AFI_PEXBIAS_CTRL_0 0x168
> >>
> >> +#define RP_ECTL_2_R1 0x00000e84
> >> +#define RP_ECTL_2_R1_RX_CTLE_1C_MASK 0xffff
> >> +
> >> +#define RP_ECTL_4_R1 0x00000e8c
> >> +#define RP_ECTL_4_R1_RX_CDR_CTRL_1C_MASK (0xffff << 16)
> >> +#define RP_ECTL_4_R1_RX_CDR_CTRL_1C_SHIFT 16
> >> +
> >> +#define RP_ECTL_5_R1 0x00000e90
> >> +#define RP_ECTL_5_R1_RX_EQ_CTRL_L_1C_MASK 0xffffffff
> >> +
> >> +#define RP_ECTL_6_R1 0x00000e94
> >> +#define RP_ECTL_6_R1_RX_EQ_CTRL_H_1C_MASK 0xffffffff
> >> +
> >> +#define RP_ECTL_2_R2 0x00000ea4
> >> +#define RP_ECTL_2_R2_RX_CTLE_1C_MASK 0xffff
> >> +
> >> +#define RP_ECTL_4_R2 0x00000eac
> >> +#define RP_ECTL_4_R2_RX_CDR_CTRL_1C_MASK (0xffff << 16)
> >> +#define RP_ECTL_4_R2_RX_CDR_CTRL_1C_SHIFT 16
> >> +
> >> +#define RP_ECTL_5_R2 0x00000eb0
> >> +#define RP_ECTL_5_R2_RX_EQ_CTRL_L_1C_MASK 0xffffffff
> >> +
> >> +#define RP_ECTL_6_R2 0x00000eb4
> >> +#define RP_ECTL_6_R2_RX_EQ_CTRL_H_1C_MASK 0xffffffff
> >> +
> >> #define RP_VEND_XP 0x00000f00
> >> #define RP_VEND_XP_DL_UP (1 << 30)
> >>
> >> @@ -265,6 +291,19 @@ struct tegra_pcie_soc {
> >> bool has_gen2;
> >> bool force_pca_enable;
> >> bool program_uphy;
> >> + struct {
> >> + struct {
> >> + u32 rp_ectl_2_r1;
> >> + u32 rp_ectl_4_r1;
> >> + u32 rp_ectl_5_r1;
> >> + u32 rp_ectl_6_r1;
> >> + u32 rp_ectl_2_r2;
> >> + u32 rp_ectl_4_r2;
> >> + u32 rp_ectl_5_r2;
> >> + u32 rp_ectl_6_r2;
> >> + } regs;
> >> + bool enable;
> >> + } ectl;
> >> };
> >>
> >> static inline struct tegra_msi *to_tegra_msi(struct msi_controller *chip)
> >> @@ -491,6 +530,52 @@ static void tegra_pcie_enable_rp_features(struct tegra_pcie_port *port)
> >> writel(value, port->base + RP_VEND_CTL1);
> >> }
> >>
> >> +static void tegra_pcie_program_ectl_settings(struct tegra_pcie_port *port)
> >> +{
> >> + const struct tegra_pcie_soc *soc = port->pcie->soc;
> >> + u32 val;
> > u32 value for consistency.
> I will take care of it in V2
> >
> >> +
> >> + val = readl(port->base + RP_ECTL_2_R1);
> >> + val &= ~RP_ECTL_2_R1_RX_CTLE_1C_MASK;
> >> + val |= soc->ectl.regs.rp_ectl_2_r1;
> >> + writel(val, port->base + RP_ECTL_2_R1);
> >> +
> >> + val = readl(port->base + RP_ECTL_4_R1);
> >> + val &= ~RP_ECTL_4_R1_RX_CDR_CTRL_1C_MASK;
> >> + val |= soc->ectl.regs.rp_ectl_4_r1 << RP_ECTL_4_R1_RX_CDR_CTRL_1C_SHIFT;
> >> + writel(val, port->base + RP_ECTL_4_R1);
> >> +
> >> + val = readl(port->base + RP_ECTL_5_R1);
> >> + val &= ~RP_ECTL_5_R1_RX_EQ_CTRL_L_1C_MASK;
> >> + val |= soc->ectl.regs.rp_ectl_5_r1;
> >> + writel(val, port->base + RP_ECTL_5_R1);
> >> +
> >> + val = readl(port->base + RP_ECTL_6_R1);
> >> + val &= ~RP_ECTL_6_R1_RX_EQ_CTRL_H_1C_MASK;
> >> + val |= soc->ectl.regs.rp_ectl_6_r1;
> >> + writel(val, port->base + RP_ECTL_6_R1);
> >> +
> >> + val = readl(port->base + RP_ECTL_2_R2);
> >> + val &= ~RP_ECTL_2_R2_RX_CTLE_1C_MASK;
> >> + val |= soc->ectl.regs.rp_ectl_2_r2;
> >> + writel(val, port->base + RP_ECTL_2_R2);
> >> +
> >> + val = readl(port->base + RP_ECTL_4_R2);
> >> + val &= ~RP_ECTL_4_R2_RX_CDR_CTRL_1C_MASK;
> >> + val |= soc->ectl.regs.rp_ectl_4_r2 << RP_ECTL_4_R2_RX_CDR_CTRL_1C_SHIFT;
> >> + writel(val, port->base + RP_ECTL_4_R2);
> >> +
> >> + val = readl(port->base + RP_ECTL_5_R2);
> >> + val &= ~RP_ECTL_5_R2_RX_EQ_CTRL_L_1C_MASK;
> >> + val |= soc->ectl.regs.rp_ectl_5_r2;
> >> + writel(val, port->base + RP_ECTL_5_R2);
> >> +
> >> + val = readl(port->base + RP_ECTL_6_R2);
> >> + val &= ~RP_ECTL_6_R2_RX_EQ_CTRL_H_1C_MASK;
> >> + val |= soc->ectl.regs.rp_ectl_6_r2;
> >> + writel(val, port->base + RP_ECTL_6_R2);
> > There are nice macros that help with this nowadays. See the FIELD_*
> > macros in include/linux/bitfield.h. However, the above is consistent
> > with the rest of the driver, so feel free to leave this as-is.
> I will leave it as-is to be inline with rest of the driver.
> >> +}
> >> +
> >> static void tegra_pcie_port_enable(struct tegra_pcie_port *port)
> >> {
> >> unsigned long ctrl = tegra_pcie_port_get_pex_ctrl(port);
> >> @@ -517,6 +602,8 @@ static void tegra_pcie_port_enable(struct tegra_pcie_port *port)
> >> }
> >>
> >> tegra_pcie_enable_rp_features(port);
> >> + if (soc->ectl.enable)
> > An empty line above would help declutter this.
> I will take care of it in V2
> >
> >> + tegra_pcie_program_ectl_settings(port);
> >> }
> >>
> >> static void tegra_pcie_port_disable(struct tegra_pcie_port *port)
> >> @@ -2229,6 +2316,7 @@ static const struct tegra_pcie_soc tegra20_pcie = {
> >> .has_gen2 = false,
> >> .force_pca_enable = false,
> >> .program_uphy = true,
> >> + .ectl.enable = false,
> >> };
> >>
> >> static const struct tegra_pcie_port_soc tegra30_pcie_ports[] = {
> >> @@ -2252,6 +2340,7 @@ static const struct tegra_pcie_soc tegra30_pcie = {
> >> .has_gen2 = false,
> >> .force_pca_enable = false,
> >> .program_uphy = true,
> >> + .ectl.enable = false,
> >> };
> >>
> >> static const struct tegra_pcie_soc tegra124_pcie = {
> >> @@ -2268,6 +2357,7 @@ static const struct tegra_pcie_soc tegra124_pcie = {
> >> .has_gen2 = true,
> >> .force_pca_enable = false,
> >> .program_uphy = true,
> >> + .ectl.enable = false,
> >> };
> >>
> >> static const struct tegra_pcie_soc tegra210_pcie = {
> >> @@ -2284,6 +2374,15 @@ static const struct tegra_pcie_soc tegra210_pcie = {
> >> .has_gen2 = true,
> >> .force_pca_enable = true,
> >> .program_uphy = true,
> >> + .ectl.regs.rp_ectl_2_r1 = 0x0000000f,
> >> + .ectl.regs.rp_ectl_4_r1 = 0x00000067,
> >> + .ectl.regs.rp_ectl_5_r1 = 0x55010000,
> >> + .ectl.regs.rp_ectl_6_r1 = 0x00000001,
> >> + .ectl.regs.rp_ectl_2_r2 = 0x0000008f,
> >> + .ectl.regs.rp_ectl_4_r2 = 0x000000c7,
> >> + .ectl.regs.rp_ectl_5_r2 = 0x55010000,
> >> + .ectl.regs.rp_ectl_6_r2 = 0x00000001,
> >> + .ectl.enable = true,
> > This should be:
> >
> > .ectl = {
> > .regs = {
> > ...
> > }
> > .enable = true;
> > },
> >
> > Do these parameters never differ between board layouts? Are they really
> > fixed per SoC generation?
> >
> > Thierry
> Till now all Tegra210 platform have same UPHY settings. They can differ if
> some components like MUX are added in UPHY routing, but I haven't seen
> such platforms with Tegra210.
Okay, let's leave it as SoC data for now. If we ever need to override
per board we can add that as a backward-compatible change.
Thierry
Attachment:
signature.asc
Description: PGP signature
