Tegra186 and Tegra30 have three PCIe root ports. AFI_PEX2_CTRL register
is defined for third root port. Offset of this register in Tegra186 is
different from Tegra30, so add offset as part of soc data structure.
Signed-off-by: Manikanta Maddireddy <mmaddireddy@xxxxxxxxxx>
---
drivers/pci/controller/pci-tegra.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/pci-tegra.c b/drivers/pci/controller/pci-tegra.c
index 11be88a394e3..8fdc7934d4c9 100644
--- a/drivers/pci/controller/pci-tegra.c
+++ b/drivers/pci/controller/pci-tegra.c
@@ -169,7 +169,6 @@
#define AFI_PEX0_CTRL 0x110
#define AFI_PEX1_CTRL 0x118
-#define AFI_PEX2_CTRL 0x128
#define AFI_PEX_CTRL_RST (1 << 0)
#define AFI_PEX_CTRL_CLKREQ_EN (1 << 1)
#define AFI_PEX_CTRL_REFCLK_EN (1 << 3)
@@ -307,6 +306,7 @@ struct tegra_pcie_soc {
unsigned int num_ports;
const struct tegra_pcie_port_soc *ports;
unsigned int msi_base_shift;
+ unsigned long afi_pex2_ctrl;
u32 pads_pll_ctl;
u32 tx_ref_sel;
u32 pads_refclk_cfg0;
@@ -516,6 +516,7 @@ static struct pci_ops tegra_pcie_ops = {
static unsigned long tegra_pcie_port_get_pex_ctrl(struct tegra_pcie_port *port)
{
+ const struct tegra_pcie_soc *soc = port->pcie->soc;
unsigned long ret = 0;
switch (port->index) {
@@ -528,7 +529,7 @@ static unsigned long tegra_pcie_port_get_pex_ctrl(struct tegra_pcie_port *port)
break;
case 2:
- ret = AFI_PEX2_CTRL;
+ ret = soc->afi_pex2_ctrl;
break;
}
@@ -2439,6 +2440,7 @@ static const struct tegra_pcie_soc tegra20_pcie = {
.num_ports = 2,
.ports = tegra20_pcie_ports,
.msi_base_shift = 0,
+ .afi_pex2_ctrl = 0x128,
.pads_pll_ctl = PADS_PLL_CTL_TEGRA20,
.tx_ref_sel = PADS_PLL_CTL_TXCLKREF_DIV10,
.pads_refclk_cfg0 = 0xfa5cfa5c,
@@ -2548,6 +2550,7 @@ static const struct tegra_pcie_soc tegra186_pcie = {
.num_ports = 3,
.ports = tegra186_pcie_ports,
.msi_base_shift = 8,
+ .afi_pex2_ctrl = 0x19c,
.pads_pll_ctl = PADS_PLL_CTL_TEGRA30,
.tx_ref_sel = PADS_PLL_CTL_TXCLKREF_BUF_EN,
.pads_refclk_cfg0 = 0x80b880b8,
--
2.17.1
