Disable controllers which failed to link up and configure CLKREQ# signals of these controllers as GPIO. This is required to avoid CLKREQ# signal of inactive controllers interfering with PLLE powerdown sequence. PCIE_CLKREQ_GPIO bits are defined only in Tegra186, however programming these bits in other SoCs doesn't cause any side effects. Program these bits for all Tegra SoCs to avoid conditional check. Signed-off-by: Manikanta Maddireddy <mmaddireddy@xxxxxxxxxx> --- drivers/pci/controller/pci-tegra.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/drivers/pci/controller/pci-tegra.c b/drivers/pci/controller/pci-tegra.c index 7e24eac12668..8e5fdc8ce3d6 100644 --- a/drivers/pci/controller/pci-tegra.c +++ b/drivers/pci/controller/pci-tegra.c @@ -160,6 +160,8 @@ #define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_211 (0x1 << 20) #define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_411 (0x2 << 20) #define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_111 (0x2 << 20) +#define AFI_PCIE_CONFIG_PCIE_CLKREQ_GPIO(x) (1 << ((x) + 29)) +#define AFI_PCIE_CONFIG_PCIE_CLKREQ_GPIO_ALL (0x7 << 29) #define AFI_FUSE 0x104 #define AFI_FUSE_PCIE_T0_GEN2_DIS (1 << 2) @@ -733,6 +735,15 @@ static void tegra_pcie_port_disable(struct tegra_pcie_port *port) value &= ~AFI_PEX_CTRL_REFCLK_EN; afi_writel(port->pcie, value, ctrl); + + /* + * disable PCIe device and set CLKREQ# as gpio + * to allow PLLE power down + */ + value = afi_readl(port->pcie, AFI_PCIE_CONFIG); + value |= AFI_PCIE_CONFIG_PCIE_DISABLE(port->index); + value |= AFI_PCIE_CONFIG_PCIE_CLKREQ_GPIO(port->index); + afi_writel(port->pcie, value, AFI_PCIE_CONFIG); } static void tegra_pcie_port_free(struct tegra_pcie_port *port) @@ -1147,9 +1158,12 @@ static int tegra_pcie_enable_controller(struct tegra_pcie *pcie) value = afi_readl(pcie, AFI_PCIE_CONFIG); value &= ~AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_MASK; value |= AFI_PCIE_CONFIG_PCIE_DISABLE_ALL | pcie->xbar_config; + value |= AFI_PCIE_CONFIG_PCIE_CLKREQ_GPIO_ALL; - list_for_each_entry(port, &pcie->ports, list) + list_for_each_entry(port, &pcie->ports, list) { value &= ~AFI_PCIE_CONFIG_PCIE_DISABLE(port->index); + value &= ~AFI_PCIE_CONFIG_PCIE_CLKREQ_GPIO(port->index); + } afi_writel(pcie, value, AFI_PCIE_CONFIG); -- 2.17.1