Le jeu. 4 avr. 2019 à 13:25, Thierry Reding <thierry.reding@xxxxxxxxx> a écrit :
>
> From: Thierry Reding <treding@xxxxxxxxxx>
>
> The Jetson Nano Developer Kit is a Tegra X1 based development board. It
> is similar to Jetson TX1 but it is not pin compatible. It features 4 GB
> of LPDDR4, an SPI NOR flash for early boot firmware and an SD card slot
> used for storage.
>
> HDMI 2.0 or DP 1.2 are available for display, four USB ports (3 USB 2.0
> and 1 USB 3.0) can be used to attach a variety of peripherals and a PCI
> Ethernet controller provides onboard network connectivity.
>
> A 40-pin header on the board can be used to extend the capabilities and
> exposed interfaces of the Jetson Nano.
>
> Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
> ---
> Changes in v2:
> - add obsolete PCIe and XUSB power supplies for backwards compatibility
> - remove pinmux node
>
> arch/arm64/boot/dts/nvidia/Makefile | 1 +
> .../boot/dts/nvidia/tegra210-p3450-0000.dts | 648 ++++++++++++++++++
> 2 files changed, 649 insertions(+)
> create mode 100644 arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
>
> diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile
> index 6b8ab5568481..bcd018c3162b 100644
> --- a/arch/arm64/boot/dts/nvidia/Makefile
> +++ b/arch/arm64/boot/dts/nvidia/Makefile
> @@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_TEGRA_132_SOC) += tegra132-norrin.dtb
> dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-0000.dtb
> dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-2180.dtb
> dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2571.dtb
> +dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p3450-0000.dtb
> dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-smaug.dtb
> dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2894-0050-a08.dtb
> dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p2771-0000.dtb
> diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
> new file mode 100644
> index 000000000000..895c829183b2
> --- /dev/null
> +++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
> @@ -0,0 +1,648 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/dts-v1/;
> +
> +#include <dt-bindings/input/gpio-keys.h>
> +#include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/mfd/max77620.h>
> +
> +#include "tegra210.dtsi"
> +
> +/ {
> + model = "NVIDIA Jetson Nano Developer Kit";
> + compatible = "nvidia,p3450-0000", "nvidia,tegra210";
> +
> + aliases {
> + ethernet = "/pcie@1003000/pci@2,0/ethernet@0,0";
> + rtc0 = "/i2c@7000d000/pmic@3c";
> + rtc1 = "/rtc@7000e000";
> + serial0 = &uarta;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory {
> + device_type = "memory";
> + reg = <0x0 0x80000000 0x1 0x0>;
> + };
> +
> + pcie@1003000 {
> + status = "okay";
> +
> + avdd-pll-uerefe-supply = <&avdd_pex_1v05>;
When trying to apply this serie on top of kernel 5.1-rc3, I have
ERROR (phandle_references): /pcie@1003000: Reference to non-existent
node or label "avdd_pex_1v05"
I haven't seen any reference of avdd_pex_1v05 in the tegra mailing
list, so I assume it should be changed to vdd_pex_1v05 instead
(without the leading "a").
Also the dt-binding from this serie doesn't apply, so I suspect a
missing change in-between ?
Thx
--
-
Nicolas (kwizart)
