Tegra194 has six PCIe controllers based on Synopsys DesignWare core. There are two Universal PHY (UPHY) blocks with each supporting 12(HSIO: Hisg Speed IO) and 8(NVHS: NVIDIA High Speed) lanes respectively. Controllers:0~4 use UPHY lanes from HSIO brick whereas Controller:5 uses UPHY lanes from NVHS brick. Lane mapping in HSIO UPHY brick to each PCIe controller (0~4) is controlled in XBAR module by BPMP-FW. Since PCIe core has PIPE interface, a glue module called PIPE-to-UPHY (P2U) is used to connect each UPHY lane (applicable to both HSIO and NVHS UPHY bricks) to PCIe controller This patch series - Adds support for P2U PHY driver - Adds support for PCIe host controller - Adds device tree nodes each PCIe controllers - Enables nodes applicable to p2972-0000 platform - Adds helper APIs in Designware core driver to get capability regs offset - Adds defines for new feature registers of PCIe spec revision 4 - Makes changes in DesignWare core driver to get Tegra194 PCIe working Testing done on P2972-0000 platform - Able to get PCIe link up with on-board Marvel eSATA controller - Able to get PCIe link up with NVMe cards connected to M.2 Key-M slot - Able to do data transfers with both SATA drives and NVMe cards Note - Enabling x8 slot on P2972-0000 platform requires pinmux driver for Tegra194. It is being worked on currently and hence Controller:5 (i.e. x8 slot) is disabled in this patch series. A future patch series would enable this. - This series is based on top of the following series Jisheng's patches to add support to .remove() in Designware sub-system https://patchwork.kernel.org/project/linux-pci/list/?series=98559 My patches made on top of Jisheng's patches to export various symbols https://patchwork.kernel.org/project/linux-pci/list/?series=101259 Changes since [v1]: * Addressed review comments from Bjorn, Thierry, Jonathan, Rob & Kishon * Added more patches in v2 series Vidya Sagar (16): PCI: Add #defines for PCIe spec r4.0 features PCI/PME: Export pcie_pme_disable_msi() API PCI: Export pcie_bus_config symbol PCI: dwc: Perform dbi regs write lock towards the end PCI: dwc: Move config space capability search API PCI: dwc: Add ext config space capability search API dt-bindings: PCI: designware: Add binding for CDM register check PCI: dwc: Add support to enable CDM register check Documentation/devicetree: Add PCIe supports-clkreq property dt-bindings: PCI: tegra: Add device tree support for T194 dt-bindings: PHY: P2U: Add Tegra 194 P2U block arm64: tegra: Add P2U and PCIe controller nodes to Tegra194 DT arm64: tegra: Enable PCIe slots in P2972-0000 board phy: tegra: Add PCIe PIPE2UPHY support PCI: tegra: Add Tegra194 PCIe support arm64: Add Tegra194 PCIe driver to defconfig .../devicetree/bindings/pci/designware-pcie.txt | 4 + .../bindings/pci/nvidia,tegra194-pcie.txt | 181 ++ Documentation/devicetree/bindings/pci/pci.txt | 5 + .../devicetree/bindings/phy/phy-tegra194-p2u.txt | 28 + arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 2 +- arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 50 + arch/arm64/boot/dts/nvidia/tegra194.dtsi | 449 +++++ arch/arm64/configs/defconfig | 1 + drivers/pci/controller/dwc/Kconfig | 11 + drivers/pci/controller/dwc/Makefile | 1 + drivers/pci/controller/dwc/pcie-designware-ep.c | 37 +- drivers/pci/controller/dwc/pcie-designware-host.c | 3 - drivers/pci/controller/dwc/pcie-designware.c | 81 + drivers/pci/controller/dwc/pcie-designware.h | 12 + drivers/pci/controller/dwc/pcie-tegra194.c | 1760 ++++++++++++++++++++ drivers/pci/pci.c | 1 + drivers/pci/pcie/pme.c | 6 + drivers/pci/pcie/portdrv.h | 5 +- drivers/phy/tegra/Kconfig | 7 + drivers/phy/tegra/Makefile | 1 + drivers/phy/tegra/pcie-p2u-tegra194.c | 120 ++ include/uapi/linux/pci_regs.h | 22 +- 22 files changed, 2743 insertions(+), 44 deletions(-) create mode 100644 Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt create mode 100644 Documentation/devicetree/bindings/phy/phy-tegra194-p2u.txt create mode 100644 drivers/pci/controller/dwc/pcie-tegra194.c create mode 100644 drivers/phy/tegra/pcie-p2u-tegra194.c -- 2.7.4
