RE: [PATCH V1 18/26] spi: tegra114: add support for hw based cs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> On Tue, Mar 26, 2019 at 10:56:39PM -0700, Sowjanya Komatineni wrote:
> 
> > Tegra SPI driver default uses SW CS control for transfers and HW CS 
> > control can be enabled through SPI client device node DT property 
> > nvidia,enable-hw-based-cs and is used only for single transfers.
>
> Why have a property - if this feature works and is useful why would a system ever not want to use it?

> > +	single_xfer = list_is_singular(&msg->transfers);
> >  	list_for_each_entry(xfer, &msg->transfers, transfer_list) {
> >  		u32 cmd1;
> >  
> >  		reinit_completion(&tspi->xfer_completion);
> >  
> > -		cmd1 = tegra_spi_setup_transfer_one(spi, xfer, is_first_msg);
> > +		cmd1 = tegra_spi_setup_transfer_one(spi, xfer, is_first_msg,
> > +						    single_xfer);
>
> It's not sufficient to check if there's only one transfer, you also need to make sure that the driver isn't using cs_change to use non-standard chip select handling.

Yes we can avoid DT and force to use HW CS incase of all single transfers without cs_change. Will update in next version.




[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux