On Tue, Dec 18, 2018 at 03:34:36PM +0800, Wei Ni wrote:
> Add "nvidia,gpu-throt-level" property to set gpu hw
> throttle level.
>
> Signed-off-by: Wei Ni <wni@xxxxxxxxxx>
> ---
> .../bindings/thermal/nvidia,tegra124-soctherm.txt | 17 +++++++++++++++--
> include/dt-bindings/thermal/tegra124-soctherm.h | 22 ++++++++++++++++++----
> 2 files changed, 33 insertions(+), 6 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt
> index ab66d6feab4b..cf6d0be56b7a 100644
> --- a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt
> +++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt
> @@ -52,6 +52,15 @@ Required properties :
> Must set as following values:
> TEGRA_SOCTHERM_THROT_LEVEL_LOW, TEGRA_SOCTHERM_THROT_LEVEL_MED
> TEGRA_SOCTHERM_THROT_LEVEL_HIGH, TEGRA_SOCTHERM_THROT_LEVEL_NONE
> + - nvidia,gpu-throt-level: This property is for Tegra124 and Tegra210.
> + It is the level of pulse skippers, which used to throttle clock
> + frequencies. It indicates gpu clock throttling depth and can be
> + programmed to any of the following values which represent a throttling
> + percentage:
> + TEGRA_SOCTHERM_THROT_LEVEL_NONE (0%)
> + TEGRA_SOCTHERM_THROT_LEVEL_LOW (50%),
> + TEGRA_SOCTHERM_THROT_LEVEL_MED (75%),
> + TEGRA_SOCTHERM_THROT_LEVEL_HIGH (85%).
> - #cooling-cells: Should be 1. This cooling device only support on/off state.
> See ./thermal.txt for a description of this property.
>
> @@ -96,22 +105,26 @@ Example :
> throttle-cfgs {
> /*
> * When the "heavy" cooling device triggered,
> - * the HW will skip cpu clock's pulse in 85% depth
> + * the HW will skip cpu clock's pulse in 85% depth,
> + * skip gpu clock's pulse in 85% level
> */
> throttle_heavy: heavy {
> nvidia,priority = <100>;
> nvidia,cpu-throt-percent = <85>;
> + nvidia,gpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_HIGH>;
>
> #cooling-cells = <1>;
> };
>
> /*
> * When the "light" cooling device triggered,
> - * the HW will skip cpu clock's pulse in 50% depth
> + * the HW will skip cpu clock's pulse in 50% depth,
> + * skip gpu clock's pulse in 50% level
> */
> throttle_light: light {
> nvidia,priority = <80>;
> nvidia,cpu-throt-percent = <50>;
> + nvidia,gpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_LOW>;
>
> #cooling-cells = <1>;
> };
> diff --git a/include/dt-bindings/thermal/tegra124-soctherm.h b/include/dt-bindings/thermal/tegra124-soctherm.h
> index c15e8b709a0d..75853df1c609 100644
> --- a/include/dt-bindings/thermal/tegra124-soctherm.h
> +++ b/include/dt-bindings/thermal/tegra124-soctherm.h
> @@ -1,5 +1,19 @@
> /* SPDX-License-Identifier: GPL-2.0 */
> /*
> + * Copyright (c) 2014 - 2018, NVIDIA CORPORATION. All rights reserved.
> + *
> + * Author:
> + * Mikko Perttunen <mperttunen@xxxxxxxxxx>
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
Why are you adding this?
> * This header provides constants for binding nvidia,tegra124-soctherm.
> */
>
> @@ -12,9 +26,9 @@
> #define TEGRA124_SOCTHERM_SENSOR_PLLX 3
> #define TEGRA124_SOCTHERM_SENSOR_NUM 4
>
> -#define TEGRA_SOCTHERM_THROT_LEVEL_LOW 0
> -#define TEGRA_SOCTHERM_THROT_LEVEL_MED 1
> -#define TEGRA_SOCTHERM_THROT_LEVEL_HIGH 2
> -#define TEGRA_SOCTHERM_THROT_LEVEL_NONE -1
> +#define TEGRA_SOCTHERM_THROT_LEVEL_NONE 0
> +#define TEGRA_SOCTHERM_THROT_LEVEL_LOW 1
> +#define TEGRA_SOCTHERM_THROT_LEVEL_MED 2
> +#define TEGRA_SOCTHERM_THROT_LEVEL_HIGH 3
You are breaking an ABI.
Rob
