Re: [PATCH V6 5/7] arm64: dts: tegra210: add CPU idle states properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 01/02/2019 17:16, Joseph Lo wrote:
> Add idle states properties for generic ARM CPU idle driver. This
> includes a C7 state which is the power down state of CPU cores.
> 
> Signed-off-by: Joseph Lo <josephl@xxxxxxxxxx>
> Acked-by: Jon Hunter <jonathanh@xxxxxxxxxx>
> ---
> v6:
>  * add ack tag from Jon.
> v5:
>  * no change
> v4:
>  * no change
> v3:
>  * no change
> v2:
>  * add entry-latency-us and exit-latency-us properties
> 
> Note:
> This dt patch depends on the DT changes in below series.
> http://patchwork.ozlabs.org/project/linux-tegra/list/?series=84380
> ---
>  arch/arm64/boot/dts/nvidia/tegra210.dtsi | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
> index 2b387364afc3..75534692604c 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
> +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
> @@ -1318,24 +1318,43 @@
>  				 <&dfll>;
>  			clock-names = "cpu_g", "pll_x", "pll_p", "dfll";
>  			clock-latency = <300000>;
> +			cpu-idle-states = <&C7>;

Please change the C7 name, that will be confusing with the C-state.

CPU_SLEEP would be nice and consistent with other drivers.

>  		};
>  
>  		cpu@1 {
>  			device_type = "cpu";
>  			compatible = "arm,cortex-a57";
>  			reg = <1>;
> +			cpu-idle-states = <&C7>;
>  		};
>  
>  		cpu@2 {
>  			device_type = "cpu";
>  			compatible = "arm,cortex-a57";
>  			reg = <2>;
> +			cpu-idle-states = <&C7>;
>  		};
>  
>  		cpu@3 {
>  			device_type = "cpu";
>  			compatible = "arm,cortex-a57";
>  			reg = <3>;
> +			cpu-idle-states = <&C7>;
> +		};
> +
> +		idle-states {
> +			entry-method = "psci";
> +
> +			C7: c7 {
> +				compatible = "arm,idle-state";
> +				arm,psci-suspend-param = <0x40000007>;
> +				entry-latency-us = <250>;
> +				exit-latency-us = <100>;
> +				min-residency-us = <1000>;
> +				wakeup-latency-us = <130>;

Regarding the entry and the exit latency, the wakeup latency sounds a
bit small.

./devicetree/bindings/arm/idle-states.txt

> +				idle-state-name = "c7-cpu-powergated";

"cpu-sleep"

> +				status = "disabled";
> +			};
>  		};
>  	};
>  
> 


-- 
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog




[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux