From: Thierry Reding <treding@xxxxxxxxxx>
Various regulators were marked as always-on for Jetson TX2. At this
point, all of the regulators are properly hooked up, so this workaround
is no longer required.
Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
---
.../arm64/boot/dts/nvidia/tegra186-p3310.dtsi | 23 -------------------
1 file changed, 23 deletions(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
index eb64d9be3231..0b62f80b0e86 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
@@ -266,43 +266,30 @@
regulator-name = "AVDD_DSI_CSI_1V2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
- /* XXX */
- regulator-always-on;
- regulator-boot-on;
};
vdd_1v8: sd2 {
regulator-name = "VDD_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- /* XXX */
- regulator-always-on;
- regulator-boot-on;
};
vdd_3v3_sys: sd3 {
regulator-name = "VDD_3V3_SYS";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- /* XXX */
- regulator-always-on;
- regulator-boot-on;
};
vdd_1v8_pll: ldo0 {
regulator-name = "VDD_1V8_AP_PLL";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- /* XXX */
- regulator-always-on;
- regulator-boot-on;
};
ldo2 {
regulator-name = "VDDIO_3V3_AOHV";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- /* XXX */
regulator-always-on;
regulator-boot-on;
};
@@ -329,18 +316,12 @@
regulator-name = "VDD_HDMI_1V05";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
- /* XXX */
- regulator-always-on;
- regulator-boot-on;
};
vdd_pex: ldo8 {
regulator-name = "VDD_PEX_1V05";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
- /* XXX */
- regulator-always-on;
- regulator-boot-on;
};
};
};
@@ -388,10 +369,6 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- /* XXX */
- regulator-always-on;
- regulator-boot-on;
-
gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
--
2.19.1
