From: Thierry Reding <treding@xxxxxxxxxx>
The new prefix allows the GPIOs to be uniquely identified on a per-chip
basis, which makes it easier to distinguish Tegra186 specific GPIOs from
those of later chips such as Tegra194 which supports a very different
set of GPIOs.
Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
---
arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
index b539561e7877..89a2da46efae 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
@@ -34,7 +34,8 @@
ethernet@2490000 {
status = "okay";
- phy-reset-gpios = <&gpio TEGRA_MAIN_GPIO(M, 4) GPIO_ACTIVE_LOW>;
+ phy-reset-gpios = <&gpio TEGRA186_MAIN_GPIO(M, 4)
+ GPIO_ACTIVE_LOW>;
phy-handle = <&phy>;
phy-mode = "rgmii";
@@ -46,7 +47,8 @@
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0x0>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_MAIN_GPIO(M, 5) IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <TEGRA186_MAIN_GPIO(M, 5)
+ IRQ_TYPE_LEVEL_LOW>;
};
};
};
@@ -91,8 +93,8 @@
/* SDMMC1 (SD/MMC) */
sdhci@3400000 {
- cd-gpios = <&gpio TEGRA_MAIN_GPIO(P, 5) GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio TEGRA_MAIN_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio TEGRA186_MAIN_GPIO(P, 5) GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio TEGRA186_MAIN_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
vqmmc-supply = <&vddio_sdmmc1>;
};
--
2.19.1
