If regulator DT node doesn't exist, its of_parse_cb callback function isn't called. Then all values for DT properties are filled with zero. This leads to wrong register update for FPS and POK settings. Signed-off-by: Jinyoung Park <jinyoungp@xxxxxxxxxx> Signed-off-by: Mark Zhang <markz@xxxxxxxxxx> --- drivers/regulator/max77620-regulator.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/regulator/max77620-regulator.c b/drivers/regulator/max77620-regulator.c index b94e3a721721..cd93cf53e23c 100644 --- a/drivers/regulator/max77620-regulator.c +++ b/drivers/regulator/max77620-regulator.c @@ -1,7 +1,7 @@ /* * Maxim MAX77620 Regulator driver * - * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved. + * Copyright (c) 2016-2018, NVIDIA CORPORATION. All rights reserved. * * Author: Mallikarjun Kasoju <mkasoju@xxxxxxxxxx> * Laxman Dewangan <ldewangan@xxxxxxxxxx> @@ -803,6 +803,14 @@ static int max77620_regulator_probe(struct platform_device *pdev) rdesc = &rinfo[id].desc; pmic->rinfo[id] = &max77620_regs_info[id]; pmic->enable_power_mode[id] = MAX77620_POWER_MODE_NORMAL; + pmic->reg_pdata[id].active_fps_src = -1; + pmic->reg_pdata[id].active_fps_pd_slot = -1; + pmic->reg_pdata[id].active_fps_pu_slot = -1; + pmic->reg_pdata[id].suspend_fps_src = -1; + pmic->reg_pdata[id].suspend_fps_pd_slot = -1; + pmic->reg_pdata[id].suspend_fps_pu_slot = -1; + pmic->reg_pdata[id].power_ok = -1; + pmic->reg_pdata[id].ramp_rate_setting = -1; ret = max77620_read_slew_rate(pmic, id); if (ret < 0) -- 2.19.2
