Enable XUSB device mode driver for USB0 slot on Jetson TX1.
Signed-off-by: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
---
arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
index 985777c..293b95f 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
@@ -1325,6 +1325,21 @@
status = "okay";
};
+ extcon_usb: extcon_vbus {
+ compatible = "linux,extcon-usb-gpio";
+ vbus-gpio = <&gpio TEGRA_GPIO(Z, 0) 1>;
+ };
+
+ xudc@700d0000 {
+ phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>;
+ phy-names = "usb2";
+ avddio_usb-supply = <&vdd_pex_1v05>;
+ hvdd_usb-supply = <&vdd_3v3_sys>;
+ avdd_pll_utmip-supply = <&vdd_1v8>;
+ extcon = <&extcon_usb>;
+ status = "okay";
+ };
+
sata@70020000 {
status = "okay";
phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
--
2.7.4
