[PATCH V5 0/3] HW Command Queue support for Tegra SDMMC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch series is for HW Command Queue support for Tegra SDMMC.

Patch[3] adds HW Command Queue support for Tegra SDMMC and has
dependencies on other patches in this series as explained below.

Patch[2] SDMMC address range:
This patch defines exact register space for all the SDMMC
Controllers. Controllers supporting command queue are having
CQHCI register space from offset 0xF000.
Patch[3] uses address range of sdmmc controllers to identify command
queue supported controllers

Patch[1] Fix V4 Mode enable:
V4 Mode need to be enabled to select Host Version 4.0 mode for HW Command
queue support with Tegra SDHCI.

Sowjanya Komatineni (3):
  mmc: sdhci: Fix sdhci_do_enable_v4_mode
  arm64: dtsi: Fix SDMMC address range
  mmc: tegra: HW Command Queue Support for Tegra SDMMC

 arch/arm64/boot/dts/nvidia/tegra186.dtsi |   6 +-
 arch/arm64/boot/dts/nvidia/tegra194.dtsi |   4 +-
 drivers/mmc/host/Kconfig                 |   1 +
 drivers/mmc/host/sdhci-tegra.c           | 138 ++++++++++++++++++++++++++++++-
 drivers/mmc/host/sdhci.c                 |   4 +-
 5 files changed, 145 insertions(+), 8 deletions(-)

-- 
2.7.4




[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux