From: Thierry Reding <treding@xxxxxxxxxx>
Not all fields were properly documented. Add kerneldoc for the missing
fields to prevent the build from flagging them.
Reported-by: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
---
drivers/i2c/busses/i2c-tegra.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index c01aeb864b5b..6d2100d6bc5d 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -154,6 +154,16 @@ enum msg_end_type {
* @clk_divisor_std_fast_mode: Clock divisor in standard/fast mode. It is
* applicable if there is no fast clock source i.e. single clock
* source.
+ * @clk_divisor_fast_plus_mode: Clock divisor in fast mode plus. It is
+ * applicable if there is no fast clock source (i.e. single
+ * clock source).
+ * @has_multi_master_mode: The I2C controller supports running in single-master
+ * or multi-master mode.
+ * @has_slcg_override_reg: The I2C controller supports a register that
+ * overrides the second level clock gating.
+ * @has_mst_fifo: The I2C controller contains the new MST FIFO interface that
+ * provides additional features and allows for longer messages to
+ * be transferred in one go.
*/
struct tegra_i2c_hw_feature {
bool has_continue_xfer_support;
@@ -175,9 +185,11 @@ struct tegra_i2c_hw_feature {
* @adapter: core I2C layer adapter information
* @div_clk: clock reference for div clock of I2C controller
* @fast_clk: clock reference for fast clock of I2C controller
+ * @rst: reset control for the I2C controller
* @base: ioremapped registers cookie
* @cont_id: I2C controller ID, used for packet header
* @irq: IRQ number of transfer complete interrupt
+ * @irq_disabled: used to track whether or not the interrupt is enabled
* @is_dvc: identifies the DVC I2C controller, has a different register layout
* @msg_complete: transfer completion notifier
* @msg_err: error code for completed message
@@ -185,6 +197,9 @@ struct tegra_i2c_hw_feature {
* @msg_buf_remaining: size of unsent data in the message buffer
* @msg_read: identifies read transfers
* @bus_clk_rate: current I2C bus clock rate
+ * @clk_divisor_non_hs_mode: clock divider for non-high-speed modes
+ * @is_multimaster_mode: track if I2C controller is in multi-master mode
+ * @xfer_lock: lock to serialize transfer submission and processing
*/
struct tegra_i2c_dev {
struct device *dev;
--
2.19.1
