The cpu_lp clock property is only needed when the CPUfreq driver
supports CPU cluster switching. But it was not a design for this driver
and it didn't handle that as well. So removing this property.
Cc: devicetree@xxxxxxxxxxxxxxx
Signed-off-by: Joseph Lo <josephl@xxxxxxxxxx>
Acked-by: Jon Hunter <jonathanh@xxxxxxxxxx>
---
*V2:
- add ack tag
---
.../devicetree/bindings/cpufreq/nvidia,tegra124-cpufreq.txt | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/cpufreq/nvidia,tegra124-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra124-cpufreq.txt
index 031545a29caf..03196d5ea515 100644
--- a/Documentation/devicetree/bindings/cpufreq/nvidia,tegra124-cpufreq.txt
+++ b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra124-cpufreq.txt
@@ -9,7 +9,6 @@ Required properties:
See ../clocks/clock-bindings.txt for details.
- clock-names: Must include the following entries:
- cpu_g: Clock mux for the fast CPU cluster.
- - cpu_lp: Clock mux for the low-power CPU cluster.
- pll_x: Fast PLL clocksource.
- pll_p: Auxiliary PLL used during fast PLL rate changes.
- dfll: Fast DFLL clocksource that also automatically scales CPU voltage.
@@ -30,11 +29,10 @@ cpus {
reg = <0>;
clocks = <&tegra_car TEGRA124_CLK_CCLK_G>,
- <&tegra_car TEGRA124_CLK_CCLK_LP>,
<&tegra_car TEGRA124_CLK_PLL_X>,
<&tegra_car TEGRA124_CLK_PLL_P>,
<&dfll>;
- clock-names = "cpu_g", "cpu_lp", "pll_x", "pll_p", "dfll";
+ clock-names = "cpu_g", "pll_x", "pll_p", "dfll";
clock-latency = <300000>;
};
--
2.19.2
