Oh I don't know that project before I made the patch. Alright I can try to enter the pinmux info into that sheet, patches will be submitted later. Mark On 12/11/2018 1:10 AM, Stephen Warren wrote: > On 12/10/18 3:52 AM, Thierry Reding wrote: >> On Mon, Dec 10, 2018 at 05:43:57PM +0800, Mark Zhang wrote: >>> Add pinmux node for Tegra210 Darcy board. >>> >>> Signed-off-by: Mark Zhang <markz@xxxxxxxxxx> >>> --- >>> .../arm64/boot/dts/nvidia/tegra210-p2894.dtsi | 1302 +++++++++++++++++ >>> 1 file changed, 1302 insertions(+) >> >> Was this generated from the pinmux spreadsheet? Would it make sense to >> add this to the tegra-pinmux-scripts[0] repository? >> >> Cc'ing Stephen for input. >> >> Thierry >> >> [0]: https://github.com/NVIDIA/tegra-pinmux-scripts > > It'd be best if the/a bootloader could initialize all the pinmux, so > that it was done once as early as possible in boot. But if that's not > possible, then yes, adding the data to the pinmux scripts repo would be > the right way forward. That way, the data could be re-used when > generating a pinmux table for U-Boot for example. >
