On 12/4/18 11:10 PM, Thierry Reding wrote:
On Tue, Dec 04, 2018 at 05:25:29PM +0800, Joseph Lo wrote:
This series introduces support for the DFLL as a CPU clock source
on Tegra210. As Jetson TX1 uses a PWM controlled regulator IC which
is driven directly by the DFLLs PWM output, we also introduce support
for PWM regulators next to I2C controlled regulators. The DFLL output
frequency is directly controlled by the regulator voltage. The registers
for controlling the PWM are part of the DFLL IP block, so there's no
separate linux regulator object involved because the regulator IC only
supplies the rail powering the CPUs. It doesn't have any other controls.
The patch 1~4 are the patches of DT bindings update for DFLL clock and
Tegra124 cpufreq, which add PWM and Tegra210 support for DFLL clock and
remove deprecate properties for Tegra124 cpufreq bindings.
The patch 5~10 are the patches for DFLL clock driver update for PWM-mode
DFLL support.
The patch 11 and 12 are the Tegra124 cpufreq driver update to make it
work with Tegra210.
The patch 13~18 are the devicetree files update for Tegra210 SoC and
platforms. Two platforms are updated here for different DFLL mode usage.
The Tegra210-p2371-2180 (a.k.a. Jetson Tx1) uses DFLL-PWM and the
Tegra210-smaug (a.k.a. Pixel C) uses DFLL-I2C. So two different modes
are verified with this series.
The patch 19 is the patch for enabling the CPU regulator for Smaug
board.
Joseph Lo (16):
dt-bindings: clock: tegra124-dfll: add Tegra210 support
dt-bindings: cpufreq: tegra124: remove vdd-cpu-supply from required
properties
dt-bindings: cpufreq: tegra124: remove cpu_lp clock from required
properties
clk: tegra: dfll: CVB calculation alignment with the regulator
clk: tegra: dfll: support PWM regulator control
clk: tegra: dfll: round down voltages based on alignment
clk: tegra: dfll: add CVB tables for Tegra210
cpufreq: tegra124: do not handle the CPU rail
cpufreq: tegra124: extend to support Tegra210
arm64: dts: tegra210: add DFLL clock
arm64: dts: tegra210: add CPU clocks
arm64: dts: tegra210-p2597: add pinmux for PWM-based DFLL support
arm64: dts: tegra210-p2371-2180: enable DFLL clock
arm64: dts: tegra210-smaug: add CPU power rail regulator
arm64: dts: tegra210-smaug: enable DFLL clock
arm64: defconfig: Enable MAX8973 regulator
Peter De Schrijver (3):
dt-bindings: clock: tegra124-dfll: Update DFLL binding for PWM
regulator
clk: tegra: dfll: registration for multiple SoCs
clk: tegra: dfll: build clk-dfll.c for Tegra124 and Tegra210
.../bindings/clock/nvidia,tegra124-dfll.txt | 77 ++-
.../cpufreq/nvidia,tegra124-cpufreq.txt | 6 +-
.../boot/dts/nvidia/tegra210-p2371-2180.dts | 20 +
.../arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 14 +
arch/arm64/boot/dts/nvidia/tegra210-smaug.dts | 31 +
arch/arm64/boot/dts/nvidia/tegra210.dtsi | 25 +
arch/arm64/configs/defconfig | 1 +
drivers/clk/tegra/Kconfig | 5 +
drivers/clk/tegra/Makefile | 2 +-
drivers/clk/tegra/clk-dfll.c | 455 ++++++++++++---
drivers/clk/tegra/clk-dfll.h | 6 +-
drivers/clk/tegra/clk-tegra124-dfll-fcpu.c | 536 +++++++++++++++++-
drivers/clk/tegra/cvb.c | 12 +-
drivers/clk/tegra/cvb.h | 7 +-
drivers/cpufreq/Kconfig.arm | 2 +-
drivers/cpufreq/tegra124-cpufreq.c | 29 +-
16 files changed, 1095 insertions(+), 133 deletions(-)
Hi Joseph,
can you highlight the build and runtime dependencies between the various
patches? For example, can I pick up all the arch/arm64 patches into the
Tegra tree without breaking anything?
Hi Thierry,
The patches for DFLL clock and dts have build dependency, which means we
need to follow the patch sequence to apply these patches (They can be
applied separately.). The runtime dependency depends on two sub-series,
"DFLL clock + cpufreq" patches and the dts series. We can just apply the
changes for "arch/arm64" but the functionality needs to wait for another
sub-series.
Thanks,
Joseph
