Re: Multi-parent IRQ domains

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Sep 13, 2018 at 02:50:21PM -0700, Florian Fainelli wrote:
> 
> 
> On 09/13/18 08:59, Thierry Reding wrote:
> > Hi everyone,
> > 
> > I've been trying to implement a feature on recent Tegra chips that's
> > called "wake events". These wake events are implemented as part of the
> > power management controller (PMC) and they control which events can be
> > used to wake the system from suspend. Events include things like an
> > alarm interrupt from an RTC, or the GPIO interrupt hooked up to a
> > power button for example.
> > 
> > We already have a driver for a couple of other things that the PMC does,
> > so I thought it'd be natural to implement this functionality as an IRQ
> > chip in the PMC driver. The way that this would work is that for all the
> > devices that are wakeup sources, we'd end up specifying the PMC as the
> > interrupt parent and the PMC would then itself have the main GIC as its
> > parent. That way, the hierarchical IRQ domain infrastructure would take
> > care of pretty much everything.
> > 
> > Unfortunately I've run into some issues here. One problem that I'm
> > facing is that PMC could have more than one parent. For example, the RTC
> > alarm interrupt goes straight to the GIC, but the power button GPIO goes
> > through the GPIO controller first and then to the GIC. This doesn't seem
> > to be something that's currently possible.
> > 
> > The way I imagine this to work from a DT perspective is as follows:
> 
> There is an interrupts-extended property which as a first cell takes a
> phandle to the parent interrupt controller, e.g:
> 
> interrupts-extended = <&gic 73 GIPC_SPI IRQ_TYPE_LEVEL_HIGH>,
> 			<&pmc 10>;
> 
> (provided that I understood your problem and example correctly). We have
> a similar use case on our STB chips where we have "main" interrupts
> wired to the ARM GIC and wake-up interrupts wired to a specific wake-up
> interrupt controller in an always-on domain. The two controllers have a
> different #interrupt-cells specifier.
> 
> The interrupt infrastructure in Linux already knows how to deal with
> that and whether you use of_get_irq() or platform_get_irq() you should
> obtain the correct virtual interrupt numbers that you expected, parented
> to the appropriate interrupt controller.

Yeah, I had looked at the interrupts-extended property as well, but
while I think it might work, one issue with that is that we'd be
modelling the regular IRQ and wakeup IRQ as two different IRQs. On
Tegra, however, the wakeup interrupt is the same as the regular
interrupt, except that the bits to enable the wake logic is in a
different hardware block. So the PMC acts more like an additional
mux for a subset of the interrupts in the system.

In addition to that, if I were to model the interrupts separately, I'd
also have to modify existing drivers for all the wakeup-able devices to
deal with two separate interrupts, which is rather undesirable.

Thierry

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux