Hi Stefan, On Sun, 24 Jun 2018 23:27:21 +0200, Stefan Agner <stefan@xxxxxxxx> wrote: > Eigth and hopefully final revision gets rid of nand_release() as > suggested by Boris. > > -- > Stefan > > Changes since v1: > - Split controller and NAND chip structure > - Add BCH support > - Allow to select algorithm and strength using device tree > - Improve HW ECC error reporting and use DEC_STATUS_BUF only > - Use SPDX license identifier > - Use per algorithm mtd_ooblayout_ops > - Use setup_data_interface callback for NAND timing configuration > > Changes since v2: > - Set clock rate using assigned-clocks > - Use BIT() macro > - Fix and improve timing calculation > - Improve ECC error handling > - Store OOB layout for tag area in Tegra chip structure > - Update/fix bindings > - Use more specific variable names (replace "value") > - Introduce nand-is-boot-medium > - Choose sensible ECC strenght automatically > - Use wait_for_completion_timeout > - Print register dump on completion timeout > - Unify tegra_nand_(read|write)_page in tegra_nand_page_xfer > > Changes since v3: > - Implement tegra_nand_(read|write)_raw using DMA > - Implement tegra_nand_(read|write)_oob using DMA > - Name registers according to Tegra 2 Technical Reference Manual (v02p) > - Use wait_for_completion_io_timeout to account for IO > - Get chip select id from device tree reg property > - Clear interrupts and reinit wait queues in case command/DMA times out > - Set default MTD name after nand_set_flash_node > - Move MODULE_DEVICE_TABLE after declaration of tegra_nand_of_match > - Make (rs|bch)_strength static > > Changes since v4: > - Pass OOB area to nand_check_erased_ecc_chunk > - Pass algorithm specific bits_per_step to tegra_nand_get_strength > - Store ECC layout in chip structure > - Fix pointer assignment (use NULL) > - Removed obsolete header delay.h > - Fixed newlines > - Use non-_io variant of wait_for_completion_timeout > > Changes since v5: > - Drop extra OOB bytes support > > Changes since v6: > - checkpatch.pl fixes > > Changes since v7: > - Replace nand_release() with mtd_device_unregister() + nand_cleanup() > > Lucas Stach (1): > ARM: dts: tegra: add Tegra20 NAND flash controller node > > Stefan Agner (5): > mtd: rawnand: add Reed-Solomon error correction algorithm > mtd: rawnand: add an option to specify NAND chip as a boot device > mtd: rawnand: tegra: add devicetree binding > mtd: rawnand: add NVIDIA Tegra NAND Flash controller driver > ARM: dts: tegra: enable NAND flash on Colibri T20 > > .../devicetree/bindings/mtd/nand.txt | 6 +- > .../bindings/mtd/nvidia-tegra20-nand.txt | 64 + > MAINTAINERS | 7 + > arch/arm/boot/dts/tegra20-colibri-512.dtsi | 16 + > arch/arm/boot/dts/tegra20.dtsi | 15 + > drivers/mtd/nand/raw/Kconfig | 10 + > drivers/mtd/nand/raw/Makefile | 1 + > drivers/mtd/nand/raw/nand_base.c | 4 + > drivers/mtd/nand/raw/tegra_nand.c | 1230 +++++++++++++++++ > include/linux/mtd/rawnand.h | 7 + > 10 files changed, 1359 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/mtd/nvidia-tegra20-nand.txt > create mode 100644 drivers/mtd/nand/raw/tegra_nand.c > Series applied to nand/next. I just changed the subject of patch3/6 to be "dt-bindings: mtd: add tegra NAND controller binding". Thanks, Miquèl -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
