This third revision is again a rather major overhaul. The driver is now able to select a sensible ECC strenght automatically. Review of the timing code uncovered few issues. Fixing them lead to a tighter timing which lead to a performance increase of about 35%. The in kernel speed test measures 11770/15058 KiB/s write/read speed. Still open is the OOB layout discrepancy issue: When using HW BCH support, the location of the ECC bytes changes depending on whether extra OOB bytes (tag data) are transmitted or not... Writing/Reading should always be with tag enabled or always without. I am not sure how to solve this correctly, maybe disallow using OOB data with HW ECC completely? Or just leave as is? -- Stefan Changes since v1: - Split controller and NAND chip structure - Add BCH support - Allow to select algorithm and strength using device tree - Improve HW ECC error reporting and use DEC_STATUS_BUF only - Use SPDX license identifier - Use per algorithm mtd_ooblayout_ops - Use setup_data_interface callback for NAND timing configuration Changes since v2: - Set clock rate using assigned-clocks - Use BIT() macro - Fix and improve timing calculation - Improve ECC error handling - Store OOB layout for tag area in Tegra chip structure - Update/fix bindings - Use more specific variable names (replace "value") - Introduce nand-is-boot-medium - Choose sensible ECC strenght automatically - Use wait_for_completion_timeout - Print register dump on completion timeout - Unify tegra_nand_(read|write)_page in tegra_nand_page_xfer Lucas Stach (2): ARM: dts: tegra: add Tegra20 NAND flash controller node ARM: dts: tegra: enable NAND flash on Colibri T20 Stefan Agner (4): mtd: rawnand: add Reed-Solomon error correction algorithm mtd: rawnand: add an option to specify NAND chip as a boot device mtd: rawnand: tegra: add devicetree binding mtd: rawnand: add NVIDIA Tegra NAND Flash controller driver .../devicetree/bindings/mtd/nand.txt | 4 + .../bindings/mtd/nvidia-tegra20-nand.txt | 64 + MAINTAINERS | 7 + arch/arm/boot/dts/tegra20-colibri-512.dtsi | 16 + arch/arm/boot/dts/tegra20.dtsi | 15 + drivers/mtd/nand/raw/Kconfig | 6 + drivers/mtd/nand/raw/Makefile | 1 + drivers/mtd/nand/raw/nand_base.c | 4 + drivers/mtd/nand/raw/tegra_nand.c | 1143 +++++++++++++++++ include/linux/mtd/rawnand.h | 7 + 10 files changed, 1267 insertions(+) create mode 100644 Documentation/devicetree/bindings/mtd/nvidia-tegra20-nand.txt create mode 100644 drivers/mtd/nand/raw/tegra_nand.c -- 2.17.0 -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
