Re: [PATCH v2 4/6] clk: tegra20: init NDFLASH clock to sensible rate

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, May 28, 2018 at 05:53:08PM +0200, Stefan Agner wrote:
> On 28.05.2018 09:55, Peter De Schrijver wrote:
> > On Sun, May 27, 2018 at 11:54:40PM +0200, Stefan Agner wrote:
> >> From: Lucas Stach <dev@xxxxxxxxxx>
> >>
> >> Set up the NAND Flash controller clock to run at 150MHz
> >> instead of the rate set by the bootloader. This is a
> >> conservative rate which also yields good performance.
> >>
> >> Signed-off-by: Lucas Stach <dev@xxxxxxxxxx>
> >> Signed-off-by: Stefan Agner <stefan@xxxxxxxx>
> >> ---
> >>  drivers/clk/tegra/clk-tegra20.c | 1 +
> >>  1 file changed, 1 insertion(+)
> >>
> >> diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c
> >> index 0ee56dd04cec..dff8c425cd28 100644
> >> --- a/drivers/clk/tegra/clk-tegra20.c
> >> +++ b/drivers/clk/tegra/clk-tegra20.c
> >> @@ -1049,6 +1049,7 @@ static struct tegra_clk_init_table init_table[] __initdata = {
> >>  	{ TEGRA20_CLK_GR2D, TEGRA20_CLK_PLL_C, 300000000, 0 },
> >>  	{ TEGRA20_CLK_GR3D, TEGRA20_CLK_PLL_C, 300000000, 0 },
> >>  	{ TEGRA20_CLK_VDE, TEGRA20_CLK_CLK_MAX, 300000000, 0 },
> >> +	{ TEGRA20_CLK_NDFLASH, TEGRA20_CLK_PLL_P, 150000000, 0 },
> >>  	/* must be the last entry */
> >>  	{ TEGRA20_CLK_CLK_MAX, TEGRA20_CLK_CLK_MAX, 0, 0 },
> >>  };
> >> --
> >> 2.17.0
> >>
> > 
> > Maybe better to specify this in the Tegra20 dtsi? See 
> > "Assigned clock parents and rates" in
> > Documentation/devicetree/bindings/clock/clock-bindings.txt
> 
> assigned-clocks indeed works just fine for this case. Thanks for
> bringing this up, will drop this patch and add the device tree
> properties in v3.
> 
> Hm, interesting that none of the Tegra device tree make use of the
> feature so far. I guess there would be other cases where this would be
> useful as well (the one just above, VDE?).
> 

Yes, historically this feature wasn't available, so we used these init tables.
Unfortunately it's not easy to get rid of them for parent and rate
configuration, because new kernels should also work with existing DTBs, so we
can't just add assigned-clock properties and remove the existing table
entries. What we could do is use the CLK_IS_CRITICAL flag for all clocks which
are only enabled by the init table. For not yet merged blocks, this is
ofcourse not a concern.

Cheers,

Peter.
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux